TL-22 CCTV Cable Stripper, Strips COAX Cables, Flat Cables, RG-59 RG-6
The TL-22 is a CCTV cable stripper can be used to strip coax cables (RG-58, RG-59, RG-62, RG-6 3C, 4C, 5C, RG-174) as well as flat cables (RJ-45, RJ-11, RJ-12).
CCTV Test Monitor, Service Analog, AHD, HD-TVI Cameras, 5" LCD
The MON-LCD35TM CCTV Test Monitor features:
- 5 inch TFT LCD Monitor - 480 x 272 Resolution
- Works with Analog CCTV, AHD, CVI, TVI Cameras Up to 4K
- BNC Video Input: PAL / NTSC
- Used in CCTV Testing and Monitoring
- Can also be used in non-CCTV applications
- Audio Input
- Built-in Speaker
- 12V-DC 800mA Output for powering cameras
- 5V-DC USB Port for cell phone/device charging
- Adjustable Wristband for convenient operation
- Built-in Rechargeable 3.7V 2600mA Lithium Battery
Discontinued
AHD Test Monitor, CCTV Camera Tester, CAT-5 Cable, PTZ, 3.5" LCD
The MON-AHD1 AHD Test Monitor features:
- 3.5 inch LCD Monitor
- AHD and Analog CCTV Camera Support
-
BNC Video Input / BNC Video Out
-
12V DC 1 Amp Power output supplies power to CCTV camera being tested
- Used in CCTV Testing and Monitoring
- Built-in PTZ Camera Tester
- Supports Over 20 PTZ Protocols
- Built-in RJ-45 Ethernet Cable Tester
-
Carrying Case and Neck Strap
-
Rechargeable Li-Ion Battery & Power Supply for Charging
- Up To 11 Hours of Battery Life with Normal Use
- 4 Hour Charge Time
- Works with PAL and NTSC Cameras
- Automatically Detects PAL or NTSC When Connected to a Camera
- Supports RS-485
Discontinued
Test Monitor For CCTV Camera Installations, DC Power Out, PTZ Tester
The MON-LCD35P Test Monitor For CCTV features:
- 3.5 inch LCD Monitor
- Supports Analog, HD-TVI, HD-CVI, AHD, and HD-SDI Formats
-
BNC Video Input / BNC Video Out
- Built-in Power Output for Camera Testing
-
12V DC 1 Amp Power Output Supplies Power to CCTV camera
- Used in CCTV Testing and Monitoring
- Built-in PTZ Camera Test
- Supports Over 20 PTZ Protocols
- Built-in RJ-45 Ethernet Cable Tester
-
Carrying Case and Neck Strap
-
Rechargeable Li-Ion Battery & Power Supply for Charging
- Up To 11 Hours of Battery Life with Normal Use
- 4 Hour Charge Time
- Works with PAL and NTSC Cameras
- Automatically Detects PAL or NTSC When Connected to a Camera
- Supports RS-485 for PTZ
Discontinued
CCTV Test Monitor, Video Tester, IP AHD HD-TVI CVI Analog CCTV Cameras
The MON-4HD CCTV / HD Security Camera Test Monitor features: - 4.3 inch IPS LCD Monitor (960 x 540 Resolution)
- AHD, HD-TVI, HD-CVI, Analog CCTV Cameras, and IP Cameras
- Supports TVI 2.0 and 3.0 (2, 3, 5, and 8 Megapixel HD-TVI Cameras)
- Supports CVI HD Cameras (Up to 8 Megapixel)
- Supports AHD Cameras (Up to 8 Megapixel)
- H.264 and H.265 Supported in up to 4K Resolution
- Works with PAL and NTSC Camera Formats
- BNC Video Input for CCTV Cameras
- BNC Video Input for HD Security Cameras
- HDMI Input / Output Supports 1080P
- LAN Input & WiFi for IP Camera Testing
- Built-in Power Output for Cameras - 12V DC 2 Amp
- PoE Output for Testing IP cameras
- USB 5V / 2 Amp Output for Mobile Phone
- Built-in PTZ Camera Tester - RS-485
- Built-in RJ-45 Ethernet Cable Tester
- Built-in POE Tester
- Carrying Case and Neck Strap
- Rechargeable Li-Ion Battery & Power Supply for Charging
- Up To 10 Hours of Battery Life with Normal Use
- Micro SD Port and 8GB Card Included
Discontinued
|
|
