You are here: Home > Video Baluns > HD Security Camera Video Baluns

HD Security Camera Video Baluns | AHD, HD-TVI, HD-CVI

AHD HD-TVI HD CVI CCTV Video Baluns

These video baluns (UTP baluns) enable CAT-5 cable to be used with analog CCTV cameras and HD security cameras (AHD, HD-TVI, and HD-CVI). CCTV Camera Pros supplies HD / CCTV video baluns that use RJ-45 connector ends, as well as the type that accepts the raw cable into a terminal block. We also have models that support power and audio. You can see how to install HD cameras with video baluns here. If you have any questions or need help picking out the best type of balun for your installation, please contact us via email, chat or phone.

Sort By:
Page of 1
AHD HDTVI HDCVI CCTV Video Balun HD CCTV Video Balun, AHD, HD-TVI, HD-CVI, 1 Passive Pair, BNC

The VB-HD2 Passive HD Video Balun features:

  • Pair: Transmitter & Receiver
  • Resolutions: D1, 960H, 720p, 1080p
  • HD Camera Support: AHD, HD-TVI, HD-CVI
  • Analog Camera Support: CVBS NTSC, PAL
  • Passive Type: No Power Required
  • UTP Connection: Wire Terminals
  • Transmits Camera Power: No. Video Only
  • Audio Support: No.
  • Built-in Surge Protection: Yes

Our Price: $6.99
AHD TVI CVI HD CCTV Video Balun HD CCTV Video Balun w/ Power, AHD, HD-TVI, HD-CVI, 1 Passive Pair, BNC

The VB-HD5P HD CCTV Video Balun with Power features:

  • Pair: Transmitter & Receiver
  • Resolutions: D1, 960H, 720p, 1080p
  • HD Camera Support: AHD, HD-TVI, HD-CVI
  • Analog Camera Support: CVBS NTSC, PAL
  • Passive Type: No Power Required
  • UTP Connection: RJ-45 for CAT5 CAT6
  • Transmits Camera Power: Yes. 12V, 24V
  • Audio Support: No.
  • Built-in Surge Protection: Yes

Our Price: $10.99
HD CCTV Video Audio Balun HD CCTV Video Balun w/ Audio, Power, AHD, HD-TVI, HD-CVI, Passive Pair

The VB-HD8PA HD CCTV Video Balun with Audio and Power features:

  • Pair: Transmitter & Receiver
  • Resolutions: D1, 960H, 720p, 1080p
  • HD Camera Support: AHD, HD-TVI, HD-CVI
  • Analog Camera Support: CVBS NTSC, PAL
  • Passive Type: No Power Required
  • UTP Connection: RJ-45 for CAT5 CAT6
  • Transmits Camera Power: Yes. 12V, 24V
  • Audio Support: Yes. RCA Surveillance Mic
  • Built-in Surge Protection: Yes

Our Price: $9.99
Active Balun Active Video Balun Transmitter / Receiver for CCTV Video, BNC to CAT5

The AVB1 active video balun transmitter / receiver features:

  • Transmitter & Receiver included
  • Transmit Analog CCTV video up to 7800 Feet w/ CAT5
  • Compatible w/ NTSC, PAL, and SECAM video standards
  • Compatible w/ AHD, HD-TVI, HD-CVI Cameras
  • Built-in Lightning Protection
  • (2) 12V DC Power Supplies Included

Our Price: $34.99
4 Channel Video Transmitter 4ch Passive Video Balun, BNC Coax to CAT5 Ethernet RJ45, CCTV AHD TVI

The Balun-4PHUB 4 Channel Video Transceiver features:

  • Sold as single unit - NOT a pair
  • 4ch BNC to CAT5 Video Balun
  • 4 x BNC Female to 1 x RJ45 Ethernet
  • Choice of RJ45 or push pin terminal
  • Up to 1200 Feet Video Transmission Over Cat-5
  • Up to 4500 Feet when used with Active Receiver
  • Analog CCTV (CVBS, AHD, HD-TVI, HD-CVI
  • D1, 960H, 720p, 1080p, 3mp, 4mp, 5mp , 8mp
  • No power required

Our Price: $19.99
Active Video Balun Transmitter VT98334T Active Video Balun Transmitter, UTP Balun, Powered, CAT-5

The VT98334T active balun features:

  • 1 Port, Active Balun - Transmitter
  • Transmits CCTV video up to 7200 feet
  • SupportsUTP CAT5 2, 3, 4, 5e, 6; 12~24 AWG or Heavier
  • Compact design
  • Cost savings by replacing costly coaxial cable
  • Neater wiring eliminates bulky cables

Our Price: $17.99
Active Video Balun Receiver Active CCTV Video Balun Receiver, CVBS, AHD, HD-TVI, HD-CVI, UTP, CAT5

The VT98334R active UTP balun receiver features:

  • 1 Port, Active Balun - Receiver
  • Transmits CCTV video up to 7200 feet
  • Supports UTP CAT5, 2, 3, 4, 5e, 6; 12~24 AWG or Heavier
  • Compact design
  • Cost savings by replacing costly coaxial cable
  • Neater wiring eliminates bulky cables
  • Used with VT98334T active balun transmitter

Our Price: $17.99
   
 

HD Video Balun Installation / Wiring

AHD HD-TVI Video Balun Wiring Diagram

The above diagram shows how to wire video baluns for HD CCTV cameras that use RJ-45 connectors to a security camera, DVR, and power supply. The concept is the same for baluns that use terminal blocks instead of RJ-45 connectors, except the installer must match up and attach the pairs of the CAT-5 that are being used. This example uses the VB-HD5P model baluns.


Video Balun Wiring with Power Supply Box

AHD HD-TVI Video Balun Wiring Diagram with Power Supply Box

This diagram uses the same baluns as above except a multi-camera power supply box is used instead of an individual power supply for the camera. The installer attaches a 2.1mm PT-3 power lead to the balun, then attaches the wires directly to the power supply box with it's screw terminals.