The Viewtron IP-C2 is a 1080p / 2mp wireless IP camera with built-in IR night vision, PIR motion detector, and 2-way audio mic. This network IP camera is design for indoor installation. It can be desktop, wall, or ceiling mounted. This camera can be hard wired using the PoE network port, or it can connect to a wireless network. Please note that in order to use WIFI mode, the camera still needs to be connected to a power supply.
The built-in infrared LEDs provide IR illumination up to 10 meters / 30 feet. The fixed 2.8mm lens captures an ultra wide angle 116 degree field of view.
This IP camera is ONVIF protocol compliant so that it can be used with any ONVIF compatible NVR. CCTV Camera Pros highly recommends using our
Viewtron hybrid security camera DVRs when using this camera in addition to BNC cameras, or Viewtron IP camera NVRs when designing a pure IP camera system. You can find additional Viewtron network IP cameras here.
Please check out these
snapshot images and this infrared video surveillance footage captured with the IP-C2 installed at CCTV Camera Pros office.
- Video Output: Network IP / RJ-45 Network Connection, ONVIF Protocol Compliant
- Video Format: H.264, H.265, MJPEG
- WIFI Support: Yes. Built-in Wireless
- Motion Detection: Yes. Built-in PIR Motion Detector / Sensor
- Supported Resolutions: 1080p / 2mp (1920 x 1080), 720p ( 1280 × 720 ), D1, CIF, 480 × 240
- Video Frame Rate: 30 FPS at 1080p Resolution
- Image Sensor: 1 / 2.7 "CMOS
- Infrared: Yes. Built-in IR Night Vision. Up to 30 Meter / 90 Feet
- Weatherproof: No. Indoor Installation Only
- Lens: Fixed 2.8mm Fixed Lens / 116.6 Degree Field of View
- Audio: Built-in Mic, Built-in Speaker, 2-way audio support
- Style: Cube Style Housing
- Installation: Desktop, Ceiling or Wall Mount
- Remote Viewing: Yes. iPhone App, Android App, Mac Software, Windows Software Included
- Power: PoE (Power over Ethernet) or 12V DC Power Supply
- SD Card Slot: Yes. Built-in micro SD card slot supports up to 128GB micro SD card
- Image Control: Digital Wide Dynamic Range Function, 3D DNR (Digital Noise Reduction)
The above image shows the dimensions of the IP-C2 in millimeters. For reference 63.1mm = 2.48 inches. 108.5mm = 4.27 inches, 71.1mm = 2.8 inches, 30.1mm = 1.19 inches, 130mm = 5.1 inches.
Download the complete
IP-C2 product specification here.
The IP-C2 can be ceiling mounted, wall mounted, or sit flat on a desktop / shelf.
The below surveillance snapshots and video was captured with the IP-C2 installed at our demo ceiling mount location on our tech room. You will notice that the camera is installed upside-down. This is normal for the ceiling installation of this camera and is easily adjusted using the image flip function built into this camera.
When the IP-C2 is used as a wireless security camera, desktop installation is very common. Once the wireless connection is configured, you can simply plug the camera into any power outlet and as long as it is within range of the wireless access point, it will automatically connect.
Watch this video surveillance demo to see the daytime and night-time IR night vision capability of the IP-C2 wireless IP security camera.
This surveillance snapshot was captured with the IP-C2 ceiling mounted in CCTV Camera Pros tech room. The IP-C2 was connected to a Viewtron NVR. Please take note of the ultra wide angle of view this camera provides. This room is 13 feet wide by 21 feet long.
Here is a snapshot captured with all of the lights off in the room, so that the camera's built-in night vision is engaged. You can see that the infrared capability of this camera is sufficient to illuminate this entire room and you can clearly see Mike's face. This room is 13 feet wide by 21 feet long.
This is what the remote IP camera view looks like using the iPhone app that is included - normal and IR night vision modes. The iPhone app can connect directly to Viewtron IP cameras or to the DVR / NVR they are connected to. You can learn more about the
Viewtron IP camera app for iPhone here.
This is what the remote IP camera view looks like using the Android app that is included. The Android app can connect directly to Viewtron IP cameras or to the DVR / NVR they are connected to. You can learn more about
how to view your IP cameras on Android with the Viewtron app here.
Complete Security Camera System Quote
Did you know? CCTV Camera Pros can provide a complete surveillance system quote that includes any Viewtron DVR / NVR with cameras, cables, connectors, power supplies, and monitors? We can even mix and match IP cameras and BNC security cameras because Viewtron DVRs are hybrid.
As you have probably already seen on our website, we have 2, 4, 8, and 16 camera surveillance systems in pre-made packages. However, it is not possible for us to package up every combination and quantity of all the different camera models that we carry. So, we can also provide you with a custom quote with as many cameras as you need and a mix of any combination of camera model(s) based on your project requirements.
View Your Security Cameras Remotely
The IP-C2 works great with
Viewtron hybrid security camera DVRs and Viewtron IP camera NVRs. Viewtron hybrids support BNC cameras and network IP cameras up to 4K resolution. Viewtron NVRs support IP cameras and have built-in power over Ethernet. The remote camera viewing apps are able to connect directly to Viewtron IP cameras and also to DVRs / NVRs.
PoE for IP Camera
This IP camera is PoE (Power-over-Ethernet) compliant which allows the installer to run a single CAT-5e network cable to provide both power and data connectivity to the camera. CAT6 cable can also be used. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.