POE Injector Kit

The POE-12V48 Power over Ethernet injector provides PoE power for a single IP camera or other device by "Injecting" DC power through the CAT5 Ethernet cable. This POE injector, also known as a PoE mid-span, connects via CAT5 Ethernet cable inline with your network switch or router. The POE-12V48 adapter will work with all POE enabled IP security cameras. It is compatible with equipment supporting the IEEE standard PoE pinout (Pins 4&5 Power + / Pins 7&8 Power -), 802.3 af. PoE injectors allow Ethernet, a common LAN (Local Area Network) protocol, to carry DC power along with data packets. This device takes AC 100-240V 50/60Hz input and outputs DC48V - 400mA or 19.2 watts. CCTV Camera Pros has found this POE injector works with all of the POE enabled IP cameras that we supply and virtually all cameras on the market.

Since the POE-12V48 POE midspan injector is a completely self-contained kit, a separate power supply and injector is not required. It features an impact resistant poly-carbonate body and includes a 3-prong detachable power cord.

POE-12V48 Power Injector Features

• Supplies PoE for one IP Camera
• IEEE802.3af PoE Standard Compliant
• Connects via CAT5 Ethernet cable inline (PoE Midspan)
• AC 100-240V 50/60Hz input
• Outputs DC48V / 400mA or 19.2 watts

How-to Connect PoE Injector to IP Camera

The above diagram shows how to connect this single port PoE injector to a Viewtron IP camera and standard network switch. You can use either CAT5e or CAT6 network cable to connect to connect the data & power out port to your IP camera. You also must connect the data in port to your network switch or router. This network setup will provide power over Ethernet to your IP camera and also connect your IP camera to your local area network.