|
MON-LCD25P Portable CCTV Test Monitor, Hand-Held, Camera Power Supply
|
|
POE-SW88 8 Port POE Switch, 10/100Mbps, 802.3af Power over Ethernet
|
|
Hand-held CCTV Monitor, LCD Service Monitor, BNC Input
|
|
|
|
Our Price: $189.99
|
|
|
|
|
|
|
The MON-LCD25P Portable CCTV Test Monitor features:
- 2.5 inch LCD Monitor
-
BNC Video Input
-
RCA to BNC converter enables you to connect to RCA and BNC devices
-
350mA DC Power output supplies power to CCTV camera being tested
- Video System Input: PAL / NTSC
- Used in CCTV Testing and Monitoring
-
Neck Strap with push release
-
Rechargeable Li-Ion Batteries & Power Supply for Charging
|
The POE-SW88 8 Port POE Switch features
- Powers up to 8 PoE IP Cameras / Devices
- POE output 112 watts
- UL Listed
- LED's to provide status feedback
- Dimensions - 16cm W x 9.4cm D x 2.1cm H
- 10/100Mbps RJ-45 ports
- IEEE 802.3af Compliant
- 64KBytes packet buffer
- CSMA/CD Compliant
- Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
- Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
- Supports Cat-5/5e up to 100 meters
|
The MON-HHLCD25 Hand-held CCTV Service Monitor features:
- 2.5 inch TFT LCD Monitor
- Manual Operation
- Video System Input: PAL / NTSC
- Used in CCTV Testing and Monitoring
- Adjustable Wristband
- Can be used as a monitor for car navigation system
- Battery is Rechargeable
|
|
|
|
POE-SW1616 16 Port POE Switch, 100Mbps Ethernet, 802.3af, Rack-Mount
|
|
D-Link PoE (Power over Ehternet) Injector / Splitter
|
|
MON-LCD35TM CCTV Test Monitor, CCTV Service Monitor, 3.5" Screen
|
|
|
|
|
|
|
|
The POE-SW1616 16 Port POE Switch features
- POE output of 300 watts (15.4 per port)
- Powers up to 16 PoE Cameras or Devices
- UL Listed
- LED's to provide status feedback
- Dimensions - 430mm W x 266mm D x 66.4mm H
- 10/100Mbps RJ-45 ports
- IEEE 802.3af Compliant
- 64KBytes packet buffer
- CSMA/CD Compliant
- Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
- Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
- Supports Cat-5/5e up to 100 meters
- Rack-Mount compatible
|
The POE-DL-IS200 Security Camera PoE Injector/Splitter features:
- Transmit Power up to 328 Feet (100m)*
- Adjustable Output Power
- Plug & Play Installation
|
The MON-LCD35TM CCTV Test Monitor features:
- 3.5 inch TFT LCD Monitor
- Video System Input: PAL / NTSC
- Used in CCTV Testing and Monitoring
- Can also be used in non-CCTV applications
- Audio & Video In/Out
- Adjustable Wristband, Desk Stand, and Wall Mount Bracket
- (4) AA Rechargeable Batteries & Recharging Power Supply
|
|
|
|
POE Network Switch, 24 Port, 12 Port PoE, 10/100
|
|
POE Network Switch, 8 Port, w/4 Port PoE, 10/100
|
|
Portable Hand-held CCTV Monitor, LCD Service Monitor, BNC Input
|
|
|
|
|
|
|
|
The NET-SW24-12POE Network POE Switch features:
- 24 10/100 Ethernet ports
- 12 PoE (Power over Ethernet) ports
- Max Total POE output 100 Watts
- Recommended for up to 8 POE IP Cameras
- Advanced auto-sensing
- Automatically determines PoE requirements, speed, duplex, and cable type
|
The NET-SW8-4POE POE Network Switch features:
- 8 Gigabit Ethernet ports
- 4 PoE (Power over Ethernet) ports
- Max Total POE output 50 Watts
- Great for all POE enabled IP cameras
- Advanced auto-sensing
- Automatically determines PoE requirements, speed, duplex, and cable type
|
The MON-LCD4 Portable Hand held CCTV Monitor features:
- 4.2 inch LCD screen
- 480 x 234 resolution
- NTSC or PAL supported
- 1 BNC Video Input
- 1 BNC Video Output
- Audio In/Out via RCA
- External Volume, Brightness, Color Controls
|
|
|
|
Vivotek POE Kit for PZ6112 and PZ6114 PTZ Cameras
|
|
BNC to VGA Video Converter
|
|
VGA to CAT-5 Converter, VGA Video Transmitter Extender
|
|
|
|
|
|
|
|
- Use with PZ6112 and PZ6114 cameras
- Injector & Splitter included
- Use a single CAT-5 for IP connection and Power
|
This BNC to VGA Video Converter features:
- Make any standard VGA computer monitor into a CCTV video monitor
- Compact size, plug and play installation
- Brightness, Contrast, Color Tint Control
- Output Resolution: 800×600@60HZ, 800×600@75HZ, 1024×768@60HZ
- 1 BNC video input
- 1 S-video input
- 1 VGA signal input
- 1 VGA signal output
- DC-5V outside power supply included
|
This VGA to CAT-5 Converter features:
- Converts a VGA video signal so it can be run using CAT-5 cable
- CAT5 cable can be run up to 300 meters
- Includes Transmitter, Receiver, 2 Power Supplies, 2 VGA Cables
- Supports Audio Transmission
|
|
|
|
CCTV Video Amplifier, 4 Input to 4 Output, RG59 Coaxial
|
|
VGA Splitter, 1 VGA Input to 2 VGA Outputs, 400MHz Video Amplifier
|
|
SP-R16 16 Channel CCTV Video Surge Protector, Coax Cable, BNC
|
|
|
|
|
|
|
|
- 4 BNC Video Inputs
- 4 BNC Vidoe Outputs
- 10dB Video Gain Compensation
- Sharpness and Brightness Adjustments
- Transmission Range: 1000 Meters using RG59 Coaxial cable
|
The VGA-1002 VGA video splitter features:
- 1 VGA Video Input
- 2 VGA video Outputs
- Boosts video signal up to 65 meter cable length
|
This Video Surge Protector features:
- 16 Channels of video surge protection for CCTV Applications
- 16 BNC Video Inputs
- 16 BNC Video Outputs
- 1U rack mount case
- Coaxial Cable Video Protection
|
|
|
|
SP-S1 Coaxial Video CCTV Surge Protector for Security Cameras
|
|
VGA Splitter, 1 VGA Input to 4 VGA Outputs, 400MHz Video Amplifier
|
|
VGA A/B Switch Box, 1 VGA Input to 2 VGA Switchable Outputs
|
|
|
|
|
|
|
|
This CCTV Video Surge Protector features:
- Coaxial Cable CCTV Video Protection
- BNC male to BNC female
- Protects equipment from High Voltage surges from nearby lighting
- Can be used with 16 channel rack mount surge protector
- Recommended 2 units installed per camera
- One mounted at DVR / One at CCTV Camera
|
- 1 VGA Video Input
- 4 VGA video Outputs
- Boosts video signal up to 65 meter cable length
|
- Share a single monitor between a computer and DVR
- 1 VGA Video Outputs
- 2 VGA video Inputs
- Selectable AB output (Rotary Switch)
|
|
|
|
CCTV Video Distribution Box, 1 Input to 4 Output Video Splitter
|
|
SP-G01 CCTV Video Ground Loop Isolator, Coaxial Cable, BNC
|
|
CCTV Video Amplifier & Splitter, 1 Input to 2 Output, RG59 Coaxial
|
|
|
|
|
|
|
|
- 1 BNC Video Inputs
- 4 BNC Video Outputs
- CCTV Camera or DVR can be used as input
- DC Power Supply Included
|
This CCTV Video Ground Loop Isolator features:
- BNC male to BNC female with mini cable 15 CM on both sides
- Passive, no power required
- Prevents video signal distortion caused by video ground loops
- Eliminates picture tearing, cross talk and rolling
- Built in TVS (Transcient Voltage Suppressors) for surge protection
|
- 1 BNC Video Input
- 2 BNC Video Outputs
- 10dB Video Gain Amplification
- Sharpness and Brightness Adjustments
- Transmission Range: 1000 Meters using RG59 Coaxial cable
- DC Power Supply Included
|
|
|
|
VGA 4 Way Monitor Switch Box, 1 VGA Input to 4 VGA Switchable Outputs
|
|
Security Camera Video Amplifier, 1 BNC Input to 1 BNC Output
|
|
VDS-4008 BNC Video Splitter, 4 BNC Inputs to 8 BNC Outputs
|
|
|
|
|
|
|
|
- Share a single monitor between up to 4 computers or DVRs
- 1 VGA Video Outputs
- 4 VGA video Inputs
- Selectable ABCD Monitor output (Rotary Switch)
|
The Amp-1001 security camera video amplifier features:
- 1 BNC Video Input
- 1 BNC Vidoe Output
- 10dB Video Gain Compensation
- Sharpness and Brightness Adjustments
- Transmission Range: 1000 Meters using RG59 Coaxial cable
|
The VDS-4008 BNC Video Splitter features:
- 4 BNC Video Inputs
- 8 BNC Video Outputs
- CCTV Camera or DVR can be used as input
- DC Power Supply Included
|
|
|
|
VDS-1008 BNC Composite Video Splitter, 1 BNC Input to 8 BNC Output
|
|
SW-301 CCTV Camera Switcher, Audio/Video Selector, 3 Inputs, 1 Output
|
|
AMP-8016 CCTV Video Amp, Splitter, 8 BNC Inputs to 16 BNC Outputs
|
|
|
|
|
|
|
|
The VDS-1008 BNC composite video splitter features:
- 1 BNC Video Inputs
- 8 BNC Video Outputs
- CCTV Camera or DVR can be used as input
- DC Power Supply Included
|
The SW-301 CCTV Camera Switcher features:
- 3 Video Inputs
- 3 Audio Inputs
- 1 Monitor Output
- Wireless Remote Control
- Power Supply Included
|
The AMP-8016 CCTV Video Amp features:
- 8 BNC Video Inputs
- 16 BNC Video Outputs
- 1U Rack Mount
- CCTV Camera or DVR can be used as input
- 10dB video gain compensation aplification and HF compression
- Sharpness and brightness adjustment for each camera
- Amplifies video transmission up to 1000 meters using RG59 coaxial cable
|
|
|
|
AMP-1632 CCTV Video Distribution Amplifier, 16 BNC In / 32 Out, RG59
|
|
VDS-1664 CCTV Video Distributor, 16 BNC In / 64 Out, Security Camera
|
|
5 Port Network Switch, 10/100 Mbps
|
|
|
|
|
|
|
|
The AMP-1632 CCTV Video Distribution Amplifier features:- 16 BNC Video Inputs
- 32 BNC Video Outputs
- 2U Rack Mount
- CCTV Cameras or DVRs can be used as input
- 10dB adjustable video gain compensation aplification and HF compression
- Sharpness and brightness adjustment for each camera
- Amplifies video transmission up to 1000 meters using RG59 coaxial cable
|
The VDS-1664 CCTV Video Distributor features:- 16 BNC Video Inputs
- 64 BNC Video Outputs
- 2U Rack Mount
- CCTV Cameras or DVRs can be used as input
- DC Power Supply Included
- Power consumption 3 amps
- Dimensions 483 x 88 x 90mm
|
The NET-SW5P - 5 port network switch features:
- Auto-sensing connectivity for up to 5 users
- No software to configure
- Negotiate to the fastest connection automatically
- Full wire speeds of either 10 Mbps or 100 Mbps
- No Fan - silent operation
|
|
|
