|
POE-PA2 Passive PoE Injector, Splitter 12v, Splitter 5v, Up to 50 Volt
|
|
RS232 to RS485 Converter, DB9 Female Connector
|
|
|
|
|
|
The POE-PA2 Passive PoE Injector / Splitter features- Includes Passive Injector & Splitter Sides
- Works with all DC powered non-PoE devices
- Supports 12v, 5v, and all voltage up to 50v DC
- Uses the power supply included with your IP camera
- Used industry standard 2.1mm DC power plugs
- Works up to 150 feet (depending on cable used and power draw of device)
|
The RS232 to RS485 Converter Features: - RS485 Half - Duplex
mode available
- ESD Protection: ±15kV - Human Body Model
- Slew-Rate Limited for Error-Free Data
Transmission
- Surge
Protection:1,500W
- ADDC - Auto Data Direction Control
- Allows up to 32 or 128 (you need order)
Transceivers on the Bus
|
|
|
|
POE-12V48 Power Over Ethernet for IP Camera, PoE Midspan Injector
|
|
POE-AT1B 12v PoE Splitter, IEEE 802.3at / 802.3af, Gigabit Ethernet
|
|
|
|
|
|
The POE-12V48 Power over Ethernet Injector features:- Supplies PoE Power for one IP Camera
- Connects via CAT5 Ethernet cable inline (PoE Midspan)
- Works with all 12v PoE Cameras
- AC 100-240V 50/60Hz input
- Outputs DC48V / 400mA or 19.2 watts
|
The POE-AT1B 12v PoE Splitter features- Gigabit Ethernet Supported (1000Mbps)
- Works with IEEE 802.3at and IEEE 802.3at PoE devices
- 30 watts max output when used with IEEE 802.3at Ethernet source
- 15.4 watts max output when used with IEEE 802.3af Ethernet source
- 8 10/100/1000Mbps RJ-45 port
- Supports Cat-5e up to 100 meters
|
|
|
|
CAT5E RJ45 Crimp Connectors, 100 Pieces
|
|
POE-AT1 802.3at PoE Injector, PoE Midspan, Gigabit Ethernet, 30 Watts
|
|
|
|
|
|
|
CAT5E RJ45 Crimp Connectors, 100 Pieces
|
The POE-AT1 802.3at PoE Injector features
- Gigabit Ethernet Supported (1000Mbps)
- IEEE 802.3at Compliant
- 8 10/100/1000Mbps RJ-45 port
- Supports Cat-5e up to 100 meters
- 100-240VAC Power Input Supports US and European power systems
- 30 watts output
- 46-52V DC Output
- Works with IEEE 802.3af & IEEE 802.3at PoE devices
|
|
|
|
5 Port Network Switch, 10/100 Mbps
|
|
D-Link PoE, Power over Ethernet, Injector / Splitter
|
|
|
|
|
|
The NET-SW5P - 5 port network switch features:
- Auto-sensing connectivity for up to 5 users
- No software to configure
- Negotiate to the fastest connection automatically
- Full wire speeds of either 10 Mbps or 100 Mbps
- No Fan - silent operation
|
The POE-DL-IS200 Security Camera PoE Injector/Splitter features:
- Transmit Power up to 328 Feet (100m)*
- Adjustable Output Power
- Plug & Play Installation
|
|
|
|
Vivotek POE Kit for PZ6112 and PZ6114 PTZ Cameras
|
|
POE-SW54 IP Camera PoE Switch, 4 Port Power Over Ethernet, 802.11af
|
|
|
|
|
|
- Use with PZ6112 and PZ6114 cameras
- Injector & Splitter included
- Use a single CAT-5 for IP connection and Power
|
The PoE-SW54 IP Camera PoE Switch features:- PoE Power for Up to 4 IP Cameras
- Works with all 12v PoE Cameras
- 5 Ports Total - 4 PoE / 1 Non
- AC 100-240V 50/60Hz input
- IEEE 802.3af Compliant
|
|
|
|
CAT-5E, UTP Unshielded Twisted Pair, Solid, 350Mhz, 1000 ft Spool.
|
|
POE-SW88 8 Port POE Switch, 10/100Mbps, 802.3af Power over Ethernet
|
|
|
|
Our Price: $189.99
|
|
|
|
|
|
CAT-5 E, UTP (Unshielded Twisted Pair), Solid, Yellow, 350Mhz, 1000 ft Spool
|
The POE-SW88 8 Port POE Switch features
- Powers up to 8 PoE IP Cameras / Devices
- POE output 112 watts
- UL Listed
- LED's to provide status feedback
- Dimensions - 16cm W x 9.4cm D x 2.1cm H
- 10/100Mbps RJ-45 ports
- IEEE 802.3af Compliant
- 64KBytes packet buffer
- CSMA/CD Compliant
- Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
- Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
- Supports Cat-5/5e up to 100 meters
|
|
|
|
POE Network Switch, 8 Port, w/4 Port PoE, 10/100
|
|
POE-SW1616 16 Port POE Switch, 100Mbps Ethernet, 802.3af, Rack-Mount
|
|
|
|
|
|
The NET-SW8-4POE POE Network Switch features:
- 8 Gigabit Ethernet ports
- 4 PoE (Power over Ethernet) ports
- Max Total POE output 50 Watts
- Great for all POE enabled IP cameras
- Advanced auto-sensing
- Automatically determines PoE requirements, speed, duplex, and cable type
|
The POE-SW1616 16 Port POE Switch features
- POE output of 300 watts (15.4 per port)
- Powers up to 16 PoE Cameras or Devices
- UL Listed
- LED's to provide status feedback
- Dimensions - 430mm W x 266mm D x 66.4mm H
- 10/100Mbps RJ-45 ports
- IEEE 802.3af Compliant
- 64KBytes packet buffer
- CSMA/CD Compliant
- Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
- Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
- Supports Cat-5/5e up to 100 meters
- Rack-Mount compatible
|
|
|
|
POE-ATS8G PoE Midspan Injector, 802.3at Ethernet, 8 Port, Rack Mount
|
|
POE Network Switch, 24 Port, 12 Port PoE, 10/100
|
|
|
|
|
|
The POE-ATS8G PoE Midspan Injector features
- Gigabit Ethernet PoE Injector
- PoE output of 240 watts (30 watts per port)
- LED status indicators
- Dimensions - 270mm (Width) x 180mm (Depth) x 45mm (Height)
- 8 10/100/1000Mbps RJ-45 ports
- IEEE 802.3at Compliant
- Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
- Fast Ethernet: 1000Mbps (half-duplex), 2000Mbps (full-duplex)
- Supports Cat-5/5e up to 100 meters
- Includes rack mount kit
|
The NET-SW24-12POE Network POE Switch features:
- 24 10/100 Ethernet ports
- 12 PoE (Power over Ethernet) ports
- Max Total POE output 100 Watts
- Recommended for up to 8 POE IP Cameras
- Advanced auto-sensing
- Automatically determines PoE requirements, speed, duplex, and cable type
|
|
|
4 Camera Systems
Geovision Surveillance
Surveillance Systems
