Home > CCTV Test Monitors >

IP Camera Test Monitor, ONVIF Support, CCTV, PTZ, PoE Tester, 7" LCD
IP Camera Test Monitor


 

CCTV / IP Camera Test Monitor

CCTV Tester Manual
Our Price: $459.99


Product Code: MON-IP7

Description
 

The MON-IP7 is a IP camera test monitor and CCTV camera test monitor with a 7" LCD touch screen. This test monitor is capable of displaying video from both IP and Analog / CCTV video streams. The MON-IP7 supports more than 40 customized IP camera protocols including Samsung, HikVision, Dahua. The tester also supports ONVIF which allow it to connect to any ONVIF compliant IP camera (1080P Max Resolution). A 7 inch TFT-LCD screen features a resolution of 1024 x 600. The touch screen support makes it easy to navigate the menu system of the tester. You can watch a video demo here.

Please note that this monitor is also available under product code MON-7HD which also supports HD security cameras (HD-TVI, HD-CVI, and AHD).

Users can connect to their IP cameras by using the built-in LAN port or by using the built-in WiFi for a wireless connection. When using the LAN port, the monitor can power the IP camera via PoE (24 watts maximum power over Ethernet). The MON-IP7 can also power CCTV cameras by using the DC-12V / 2 Amp power output. With the Micro SD Card Slot, users can record and playback video directly on the monitor.

The HDMI video output supports 1920 x 1080 resolution. Both Analog and IP PTZ protocols are supported for PTZ camera testing. With a fully charged battery (7 Hour Charge Time) the monitor can last up to 15 hours with normal use. The full featured user friendly OSD (On Screen Display) allows the user to navigate through all menus and adjust settings with ease. A few more features of the MON-IP7 include audio in / out, IP address scanner, port finder and link tester. All of this comes neatly packaged in a padded carrying case for easy storage and portability.

CCTV / IP Camera Test Monitor Features

  • 7 inch TFT LCD Monitor (1024 x 600 Resolution)
  • BNC Video Input / BNC Video Out for CCTV Camera Testing
  • LAN Input & WiFi for IP Camera Testing
  • PoE Port for Hard Wired IP Camera Testing
  • Built-in DHCP Server for IP cameras
  • 12V DC 2 Amp Power Output for Powering Cameras (works with CCTV cameras and IP cameras)
  • POE (24 Watt Max) for Powering PoE IP Cameras
  • USB 5V / 2 Amp Output for Mobile Phone
  • Used in IP and CCTV Testing and Monitoring
  • Built-in PTZ Camera Tester
  • Supports Both Analog and IP PTZ Cameras
  • Built-in RJ-45 Ethernet Cable Tester
  • Built-in POE Tester
  • Network IP scanner displays all addresses on the network
  • Network Cable Tracer Tool
  • Identifies IP Address of Cat-5 Cable Run
  • Network Cable to Switch Port Locator
  • Carrying Case and Neck Strap
  • Rechargeable Li-Ion Battery & Power Supply for Charging
  • 7 Hour Charge Time
  • Up To 15 Hours of Battery Life with Normal Use
  • Works with PAL and NTSC Cameras
  • Record and Playback Using a Micro SD Card
  • 4GB Micro SD Card Included (Supports up to 32GB)
  • Automatically Detects PAL or NTSC When Connected to a Camera
  • Supports RS-232 and RS-485
  • Firmware Updates
  • Dimensions - 253mm (9.96") x 176mm (6.92") x 52mm (2.04")


Product Specification

Download MON-IP7 product specification PDF.


Video Demo

Watch this video to see how the test monitor connects to a network via WIFI, then scans the network for ONVIF complaint IP cameras. Last the installer displays the live video from a Zavio F3210 IP camera on the screen.


IP Camera Tester

One of the main functions of the MON-IP7 is the ability to display a live video feed from any ONVIF compliant IP camera. The below image shows the tester connected to a Zavio F3210 IP camera. You can view instructions here on how to setup the monitor for IP camera testing.

IP Camera Test Montior


ONVIF Compatible

The IP camera testing function of the MON-IP7 is compatible with ONVIF compliant IP cameras. We can say with almost 100% certainty that the video tester will work with all IP cameras that are compliant with ONVIF standards. We say almost 100% certainty because there are several versions of the ONVIF specification and it is up to each IP camera manufacturer to write their firmware to the specification. Some manufacturers are better at software development than others. Also, please keep in mind that some manufacturers may only have some of their cameras compliant with the standard. Below is a list of some of the big IP camera manufacturers that participate in ONVIF.

If you order the tester from CCTV Camera Pros and does not work with your camera(s), you can return it within 20 days from when you receive it for a full refund (according to our return policy).

  • Zavio
  • Vivotek
  • Arecont Vision
  • Axis
  • Bosch
  • Brickcom
  • Canon
  • Cisco
  • Dahua
  • Dynacolor
  • Flir
  • HIKVision
  • Honeywell
  • Lilin
  • Messoa
  • Milestone
  • Mobotix
  • Panasonic
  • Pelco
  • Qnap Security
  • Samsumg
  • Siemans
  • Sony
Please note that this is only a partial list of manufacturers that participate in ONVIF.

Cable to Switch Port Locator

The port locator app lets installers trace which port on a network switch an Ethernet cable is connected to. This tester works with non-PoE and PoE switches. The installer connects the network cable (CAT-5, CAT-6, CAT-5e, etc.) to the LAN port of the MON-IP7 test monitor and the testing tool sends a signal to the switch that causes the status LED to blink on the port that the other end of the cable is connected to. You can view instructions here on how to setup the network cable to switch tracing tool.

Network Switch Port Location Tester


Network Cable Tracer

Another great tool built into the MON-IP7 is the network cable tracer. The cable tracer uses a tone probe tool, that is included with the monitor, to locate network cables by using an audible ring when the signal from the monitor is detected. You can see the instructions for the network cable tracer tool here.

Network Cable Tracer


Firmware Update Instructions

The firmware of the MON-IP7 can be updated to fix any bugs and to add the latest features released by the developers. You can see the instructions to update the firmware here.

IP Test Monitor Firmware Update Instructions


POE Setup Instructions

The MON-IP7 can be used to power a POE compliant IP camera using the LAN / POE port. This is especially useful for installers who wish to test and / or adjust the camera angle of view prior to mounting the camera. Please follow the MON-IP7 IP Camera Test Monitor POE instructions here to use the POE function of the MON-IP7.

MON-IP7 POE IP Camera Test Monitor


IP Camera Tester Using DHCP Server

The MON-IP7 and MON-7HD are able to connect to any ONVIF compliant IP camera on the network they are connected to, but they are also able to test cameras connected directly to the monitor using the built-in DHCP server. You can see the instructions for the DHCP server setup here.

DHCP Server Setup


IP Camera Test Monitor ONVIF PTZ Controls

The MON-IP7, MON-7HD, and MON-4HD are able to connect to any ONVIF compliant IP PTZ camera on the network they are connected to. This article will cover using the Pan, Tilt, and Zoom features on the MON-IP7, MON-7HD, and MON-4HD IPC test monitors. You can see the instructions for the ONVIF PTZ controls here.

IP Camera Test Monitor ONVIF PTZ Controls


Accessories

The below image shows the accessories that are included in the box with the MON-IP7: BNC jumper cable, 12V DC power cable, test monitor strap, storage bag strap, RS-485 cable with alligator clips, audio cable with alligator clips, remote UTP cable tester, power supply / charger, carrying case.
MON-IP7 IP / CCTV Test Monitor Accessories


Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Best All Around Test Monitor December 1, 2016
Reviewer: Steve Mack from Jacksonville, FL United States  
I have been installing video surveillance systems for over 15 years. This tester helps me no matter what type of system I am installing. I use it for IP, analog CCTV, HD-TVI, and AHD cameras. I love having a single test monitor that works with all camera platforms.

Was this review helpful to you?


Browse for more products in the same category as this item:

CCTV Test Monitors
Installation Tools