You are here: Home > Support & Knowledge Base > IP Camera Test Monitor ONVIF PTZ Controls

IP Camera Test Monitor ONVIF PTZ Controls

IPC Camera Test Monitor PTZ Controls

The MON-IP7, MON-7HD, and MON-4HD are able to connect to any ONVIF compliant IP PTZ camera on the network they are connected to. This article will cover using the Pan, Tilt, and Zoom features on the MON-IP7, MON-7HD, and MON-4HD IPC test monitors. This is specifically for IP PTZ cameras. If you have an Analog PTZ, you will use the PTZ app on the monitor.

How to control IP PTZ cameras

1. Go to the ONVIF tool and connect to your IP camera.

NOTE: If you do not have a connection to the IP camera, please refer to this article -- IPC Tester Camera Direct Connection Using DHCP Server

2. Now select the VideoMenu option located in the upper right-hand corner of the screen. (Shown Below).

IP Camera Test Monitor ONVIF PTZ

3. Now select the PTZ icon located on the bottom left. This will bring up a digital PTZ keyboard and allow you to pan, tilt, and zoom the camera. (Shown Below).


About the Author

Mike Haldas

These setup instructions were written by , co-founder and managing partner of CCTV Camera Pros. If you have any questions about them or anything related to video surveillance systems and equipment, please email me at