The VT-J302 is a round security camera junction box that has a 5.5 inch / 139mm diameter. This white junction box is made of weatherproof aluminum construction that is perfect for outdoor installations. It can be used with dome and bullet style security cameras (BNC cameras and network IP cameras). The 3-hole and 4-hole screw mount patterns are supported. The universal pre-drilled hole patterns make this j-box compatible with just about every security camera, from all manufacturers. There are 2 pre-drilled
threaded conduit entries for 3/4" conduit located on the side an back of the junction box which are optional to use.
Check out these
installation examples that use this junction box. You can also watch this video where Mike explains many of the benefits.
Optional Corner Mount Bracket
The
VT-CNM5 corner mount bracket can be used with this junction box. The VT-CNM5 allows you to install this bracket on a 90 degree corner of a building / structure.
This is what the junction box looks like when installed wit the optional
VT-CNM5 corner mounting bracket.
Optional Pole Mount Bracket
The
VT-PM5 pole mount bracket can be used with this junction box. The VT-PM5 allows you to install this bracket on round pole.
This is what the junction box looks like when installed wit the optional
VT-PM5 pole mounting bracket.
Gray Junction Box
This junction box is also available as a
gray camera junction box (model VT-J302G) Here is a picture the VT-J302G junction box used to mount a
BIPRO-9004 bullet camera. Please note that the VT-J302 can be used as a wall mount or ceiling mount for dome cameras and bullet cameras.
Camera Mount Measurements Guide
The pre-threaded screw hole patterns supported by the VT-J302 support many different medium sized security cameras. This is junction box is designed for universal compatibility with all security camera manufacturers that use standard patterns and dimensions. Mounting screws are included.
The pre-drilled holes for the installation anchors on the back of the junction box are spaced 62mm / 2.44 inches apart.
There are 3/4" conduit entries located on the side and back of the junction box. In the above image you can see the conduit entry plug screwed into the conduit inlet located on the side of the junction box and the rear conduit hole open. Installers can use this conduit entry located on the rear of the box to feed cable through security when the junction box is mount flush against a ceiling or wall. Or you can use that entry to create a pendant mount installation to bring your security camera lower on high ceiling installations.
In the above video, Mike discusses the major benefits of using a weatherproof outdoor junction box for security camera installations on the exterior of a building.
Here are some example security camera installations using the VT-J302 junction box. This is an installation on a commercial building at a business.
Commercial Installation
Here is a picture of our
IP-A4BZ 4mp bullet IP camera mounted to the junction box. This junction box works with most of our bullet style Viewtron IP cameras.
Residential Installation
The VT-J302 is also a great choice for residential installations. Here is a picture of one being used in a home security camera installation on a house in South Florida. This is the
Viewtron 4K-B9 IR bullet camera.
Pole Installation
Here is another commercial installation that uses the VT-J302. This shows the Viewtron LPR-IP7 installed on a pole at CCTV Camera Pros warehouse using the junction box. The LPR-IP7 is a medium sized
license plate recognition camera.
Product Specification
You can download the
VT-J302 product specification here.