The Vivotek IP816A-LPC is a license plate capture IP camera with 1080p recording resolution - 1920 x 1080 at 30 frames per second or 60 frames per second in single stream mode. The Vivotek IP816A-LPC LPR camera uses a 12 ~ 40mm varifocal lens and a 1/1.9" progressive scan CMOS images sensor to provide superior image quality.
This camera is capable of capturing the license plates from up to two lanes of traffic at a time from a max distance of 20 meters / 60 feet on cars traveling 80 KM/H / 50 MPH or less.
The WDR Pro feature allows the camera to capture a high-resolution image in environments with challenging lighting conditions, such as bright backlighting. It works by combining the darkest part of the image with the brightest part to create one highly detailed and balanced image.
The 3D Digital Noise Reduction feature enhances the image quality by removing image noise and graininess. A Removable IR Cut Filter blocks any unusable infrared lighting and only allows the visible light to pass through, further enhancing the image quality.
Users can record video clips and snapshots locally using the Micro SD / SDHC / SDXC Card Slot. The IP816A-LPC can be powered by either 12V-DC, 24V-AC or POE 802.3AF, allowing for both data and power to be run over one Cat-5E cable. Like all Vivotek cameras, the IP816A-LPC includes a 32 channel central management software.
Vivotek IP816A-LPC Features:
- 12 ~ 40mm Varifocal Lens
- 1920 x 1080 at 60 Frames Per Second (Single Stream)
- 1920 x 1080 at 30 Frames Per Second (Dual Stream)
- HD License Plate Capture / License Plate Recgonition (LPR)
- 2 Megapixel 1/1.9" Progressive CMOS Image Sensor
- WDR Pro Enhancement
- Focus Assist
- Removable IR Cut Filter
- 3D Digital Noise Reduction
- Tampering Detection
- 12V-DC / 24V-AC Compatible
- POE 802.3af Compliant
- Remotely Accessible
- H.264 and MJPEG Video Compression
- Micro SD / SDHC / SDXC Card Slot
- Includes Vivotek 32ch Central Management Software
- ONVIF Support
Vivotek IP816A-LPC Specification
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about how to wire IP cameras using a PoE injectors or a PoE switch.