The IP-ELT8 is a 1080p / 2 megapixel elevator IP camera that features an ultra-wide angle 2.8mm lens and infrared night vision capability.
This network security camera can be used with this optional wireless camera system bridge.
ultra-wide angle lens allows the IP-ELT8 to be mounted in the corner of an elevator or small room and see the entire area. The built-in infrared LEDs of the IP-ELT8 can fully illuminate an elevator or small room even in zero light conditions. The front of the camera is crafted from metal to withstand impacts and acts of vandalism.
IP-ELT8 Elevator Camera Features
- 1/2.8" Sony STARVIS CMOS Image Sensor
- 2 Megapixel Resolution / 1080p
- Video Compression: H.265, H.264, MJPEG
- ONVIF Compliant / Version 17.06
- Ultra Wide Angle 2.8mm Megapixel Lens / F1.6
- Power over Ethernet
- Ultra-Wide Angle Lens - 104° Horizontal Angle of View
- Zero Light Infrared Night Vision 30 Pieces Infrared LEDs / 32 foot IR Distance
- Vandal Resistant Enclosure / Metal Front Cover
- Smart 3D-DNR (Digital Noise Reduction)
- Digital WDR (Wide Dynamic Range)
Complete Security Camera System Quote
Did you know? CCTV Camera Pros can provide a complete surveillance system quote that includes any Viewtron DVR / NVR with cameras, cables, connectors, power supplies, and monitors? We can even mix and match IP cameras and BNC security cameras because Viewtron DVRs are hybrid.
As you have probably already seen on our website, we have 2, 4, 8, and 16 camera surveillance systems in pre-made packages. However, it is not possible for us to package up every combination and quantity of all the different camera models that we carry. So, we can also provide you with a custom quote with as many cameras as you need and a mix of any combination of camera model(s) based on your project requirements.
View Your Security Cameras Remotely
The IP-ELT8 works great with
Viewtron hybrid security camera DVRs and Viewtron IP camera NVRs. Viewtron hybrids support BNC cameras and network IP cameras up to 4K resolution. Viewtron NVRs support IP cameras and have built-in power over Ethernet. The remote camera viewing apps are able to connect directly to Viewtron IP cameras and also to DVRs / NVRs.
PoE for IP Camera
This IP camera is PoE (Power-over-Ethernet) compliant which allows the installer to run a single CAT-5e network cable to provide both power and data connectivity to the camera. CAT6 cable can also be used. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.