Home > CCTV Test Monitors >

Test Monitor For CCTV Camera Installations, DC Power Out, PTZ Tester
Test Monitor For CCTV


 

Test Monitor For CCTV

CCTV Tester Manual
Our Price: $299.99


Product Code: MON-LCD35P

Description
 
The MON-LCD35P is a test monitor for Analog, HD-TVI, HD-CVI, AHD, and HD-SDI camera formats. It also features a multi-purpose testing unit that includes built in PTZ tester and address scanning, RJ-45 / UTP cable test, digital multimeter, and audio surveillance test. This portable test monitor also has a 12V DC 1 Amp power output which allows surveillance system installers to mount, focus and test security cameras before installing permanent video or power cables (works only with DC powered cameras up to 1 Amp). This hand-held monitor supports more than 20 PTZ Protocols, making this monitor compatible with almost all pan tilt zoom cameras on the market. When a camera is connected, the monitor automatically determines whether it is PAL or NTSC. The MON-LCD35P charges in about 4 hours and can last up to 11 hours of normal use on a single charge. The screen is a 3.5" LCD and provides a clear image for focusing cameras. The brightness, contrast and saturation of the LCD are fully adjustable to meet the needs of the user. The LCD35P includes a carrying case, neck strap, RS-485 cables, rechargeable battery, charger, and RJ-45 remote.

Test Monitor For CCTV Features

  • 3.5 inch LCD Monitor
  • Supports Analog, HD-TVI, HD-CVI, AHD, and HD-SDI Formats
  • BNC Video Input / BNC Video Out
  • 12V DC 1 Amp Power Output
  • Supplies Power to CCTV Camera Being Tested
  • Used in CCTV Testing and Monitoring
  • Built-in PTZ Camera Test
  • Supports Over 20 PTZ Protocols
  • Built-in RJ-45 Ethernet Cable Tester
  • Carrying Case and Neck Strap
  • Rechargeable Li-Ion Battery & Power Supply for Charging
  • Up To 11 Hours of Battery Life with Normal Use
  • 4 Hour Charge Time
  • Works with PAL and NTSC Cameras
  • Automatically Detects PAL or NTSC When Connected to a Camera
  • Supports RS-485 for PTZ

Digital Multimeter

The MON-LCD35P has a built in digital multiplier which allows low voltage installers and electricians to test both AC and DC power sources and cable runs.
Test Monitor with Digital Multimeter

UTP Cable Tester

The MON-LCD35P has a built in UTP cable tester so that installers can verify that CAT-5 and CAT-6 Ethernet cables are working properly. Testing your Ethernet cable runs with a professional cable tester can save hours of troubleshooting. The RJ-45 UTP cable jack can be seen on this side of the test monitor.

USB / UTP Scan Ports

The right side of the MON-LCD35P has the following ports:

  • USB: Charger Input.
  • UTP / Scan: UTP cable tester so that installers can verify that CAT-5 and CAT-6 Ethernet cables are working properly. Testing your Ethernet cable runs with a professional cable tester can save hours of troubleshooting. The RJ-45 UTP cable jack can be seen on the right side of the test monitor.

Test Monitor with USB and UTP Cable Tester

Audio In / Reset Ports

  • Audio In: used to test audio surveillance microphones.
  • Reset: Reset to the default settings
Test Monitor with Audio Tester and Reset

Test Monitor Accessories

The below image shows the accessories that are included in the box with the MON-LCD35P
Test Monitor Accessories

Test Monitor with Camera Power Output

One of the unique features of the MON-LCD35P test monitor is that it has a 12V DC 1 Amp power output that can be used to supply power to the CCTV camera that is being tested. Please note that this tester can only supply power to 12V DC cameras.
Test Monitor with Camera Power



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

CCTV Test Monitors
Installation Tools
CCTV Test Monitors > SDI Test Monitors