Please Note: The Vivotek IP816A-LPCKIT-40 is no longer manufactured. Please refer to the Vivotek IP9165-LPC-KIT for a replacement.
The Vivotek IP816A-LPCKIT-40 is a license plate capture IP camera featuring a recording resolution of
1920 x 1080 at 30 frames per second or 60 frames per second in single stream mode. The Vivotek IP816A-LPCKIT-40 also features a 12 ~ 40mm varifocal lens and a 1/1.9" progressive scan CMOS images sensor to provide superior image quality.
This camera is capable of capturing the license plates from
up to two lanes of traffic at a time from a max distance of 20 meters / 60 feet on cars traveling 80 KM/H / 50 MPH or less.
The
WDR Pro feature allows the camera to capture a high resolution image in environments with challenging lighting conditions, such as bright back lighting. It works by combining the darkest part of the image with the brightest part to create one highly detailed and balanced image.
An
IK10 / IP66 rated enclosure protects the vital components of the camera from harsh weather, dust, humidity and acts of vandalism.
The
3D Digital Noise Reduction feature enhances the image quality by removing image noise and graininess. A Removable IR Cut Filter blocks any unusable infrared lighting and only allows the visible light to pass through, further enhancing the image quality.
Users can record video clips and snapshots locally using the
Micro SD / SDHC / SDXC Card Slot. The IP816A-LPCKIT-40 is powered by 24V-AC along with the infrared LED module. Like all Vivotek cameras, the IP816A-LPCKIT-40 includes a 32 channel central management software.
Vivotek IP816A-LPCKIT-40 Features:
- 12 ~ 40mm Varifocal Lens
- 1920 x 1080 at 60 Frames Per Second (Single Stream)
- 1920 x 1080 at 30 Frames Per Second (Dual Stream)
- 2 Megapixel 1/1.9" Progressive CMOS Image Sensor
- WDR Pro Enhancement
- Focus Assist
- Removable IR Cut Filter
- 3D Digital Noise Reduction
- Tampering Detection
- 24V-AC Powered
- Remotely Accessible
- H.264 and MJPEG Video Compression
- Micro SD / SDHC / SDXC Card Slot
- Includes Vivotek 32ch Central Management Software
- ONVIF Support
Vivotek IP816A-LPCKIT-40 Specification
Detailed Product View
Click on the image above for a larger view.
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.
