The Vivotek IP816A-HP is a professional IP box camera featuring a recording resolution of
1920 x 1080 at 30 frames per second or 60 frames per second in single stream mode. The Vivotek IP816A-HP also features a 4 ~ 18mm varifocal lens and a 1/1.9" progressive scan CMOS images sensor to provide superior image quality.
WDR Pro feature allows the camera to capture a high resolution image in environments with challenging lighting conditions, such as bright back lighting. It works by combining the darkest part of the image with the brightest part to create one highly detailed and balanced image.
This camera features a low light rating of 0.03 lux in color mode and 0.001 lux in black & white mode. The
3D Digital Noise Reduction feature enhances the image quality by removing image noise and graininess. A Removable IR Cut Filter allows for the use of an external infrared illuminator by blocking any unusable lighting and only allowing the visible light to pass through.
Users can record video clips and snapshots locally using the
Micro SD / SDHC / SDXC Card Slot. The IP816A-HP can be powered by 12V-DC, 24V-AC or POE 802.3af, allowing for both data and power to be run over one Cat-5E cable. Like all Vivotek cameras, the IP816A-HP includes a 32 channel central management software.
Vivotek IP816A-HP Features:
- 4 ~ 18mm Varifocal Lens
- 1920 x 1080 at 60 Frames Per Second (Single Stream)
- 1920 x 1080 at 30 Frames Per Second (Dual Stream)
- 2 Megapixel 1/1.9" Progressive CMOS Image Sensor
- WDR Pro Enhancement
- Focus Assist
- Removable IR Cut Filter
- 0.001 Lux Rating in B /W Mode
- 0.03 Lux Rating in Color Mode
- 3D Digital Noise Reduction
- POE 802.3af Compliant
- Supports Two-Way Audio (With External Mic and Speaker)
- Tampering Detection
- Dual Voltage 12V-DC / 24V-AC
- Remotely Accessible
- H.264 and MJPEG Video Compression
- Micro SD / SDHC / SDXC Card Slot
- Includes Vivotek 32ch Central Management Software
- ONVIF Support
Vivotek IP816A-HP Specification
Quick Installation Guide
Detailed Product View
Included in the box
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.