Please Note: The Vivotek FD8362 is no longer manufactured, please refer to the Vivotek FD8363.
The Vivotek-FD8362 is a Megapixel Vandal Dome Camera featuring a recording resolution of 1080P at up to 30 frames per second. The Vivotek-FD8362 Megapixel Vandal Dome Camera provides exceptional image quality with a 2 Megapixel, 1/2.7" CMOS image sensor and a 3 - 9mm Varifocal lens.
To further enhance the image quality is the WDR feature which allows the camera to pick up high detail in very bright and dark environments. The IP66 rated housing allows the Vivotek-FD8362 to withstand temperatures as low as 32°F and resist vandal attacks. This camera can support two-way audio and includes a built-in microphone.
The Vivotek-FD8362 features a Micro SD / SDHC card slot for users who wish to record video clips and image snapshots locally. It can be powered by 12V-DC, 24V-AC or POE 802.3af. To ensure a smooth video feed the Vivotek-FD8362 supports simultaneous video streams of each H.264, MJPEG and MPEG-4.
The Vivotek-FD8362 includes a 32 channel central management software and is also fully compatible with NUUO IP Camera Software for users who want to get the most out of their cameras. This camera is ideal for securing locations ranging from business' to school campuses.
- 3 - 9mm Varifocal Lens
- Full 1080P resolution at 30FPS
- 1/2.7" 2 Megapixel CMOS image sensor
- WDR enhancement
- Compatible with NUUO IP Software
- 0.001 Lux rating in B /W mode
- POE 802.3af compliant
- IP66 rated weatherproof housing
- Tampering detection
- Dual voltage 12V-DC / 24V-AC
- Remotely accessible
- H.264, MJPEG and MPEG4 video compression
- Micro SD / SDHC card slot
- Includes Vivotek 32ch Central Management Software
- ONVIF support
Vivotek-FD8362 Quick Installation Guide
Included in the box
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about how to wire IP cameras using a PoE injectors or a PoE switch.