The HDMI-RX1 is an additional receiver unit used in the HDMI over Cat6 systems supplied by CCTV Camera Pros.
Features
- Transmission Distance up to 40 Meters / 131 Feet
- Power over CAT6 Cable from Transmitter
- IR Remote Pass Back 20~60Hz (Wireless Remote Support)
Front & Back View
The above images show the front and back of the HDMI-RX1. You can see that the RJ-45 Cat 6 input is on one side of the device along with a length button. The length button can be used to adjust the video signal if it is not clear with the default setting. The image on the left shows where the HDMI output is located as well as the input for the IR receiver cable. Note that the 5V power input is not used because power is supplied over the CAT-6 cable from transmitter.
Infrared Receiver Cable
Here is a close-up of IR receiver cable that is included with each unit. The cable is simply plugged into the HDMI receiver so that an infrared remote control can be pointed at the receiver device to control a device, such as a DVR, at the transmitter end of this system.