Please Note: The Vivotek FD8162 is no longer manufactured and has been replaced by the Vivotek FD8167.
The Vivotek-FD8162 is a Fixed Dome IP Camera featuring a
2 Megapixel CMOS image sensor and 3 - 9mm Varifocal lens that features the Focus Assist Button which enables the user to precisely dial in an adequate focus point. The Vivotek-FD8162 Fixed Dome IP Camera is capable of recording in full 1080P resolution at up to 30 frames per second.
The
Removable IR Cut Filter allows the camera to maintain a clear image any time of day. To pickup high detail in extra bright or dark environments the WDR Enhancement comes into play and balances out the lighting to provide an exceptional image. A feature that sets this camera apart from the rest is the PIR Detection which identifies thermal characteristics and triggers an alarm , this ensures a higher level of security.
The built-in
IR illuminators have a range of up to 15 meters or 49 feet. Simultaneous video streams of each H.264, MJPEG and MPEG-4 are supported to produce a smooth video feed. The Vivotek-FD8162 can be powered by 12V-DC, 24V-AC or POE 802.3af and features a 4 step, Hassle Free Installation.
The Vivotek-FD8162 includes a 32 channel central management software and is also fully compatible with
NUUO IP Camera Software for users who want to get the most out of their cameras. This camera is ideal for securing locations ranging from business' to school campuses.
Vivotek-FD8162 Features:
- 3 - 9mm Varifocal Lens
- Full 1080P resolution at 30FPS
- 1/2.7" 2 Megapixel, Progressive scan CMOS image sensor
- Hassle free installation
- WDR enhancement
- 15M / 49FT IR Range
- Compatible with NUUO IP Software
- 0.001 Lux rating in B /W mode
- POE 802.3af compliant
- Tampering detection
- Supports two-way audio
- Dual voltage 12V-DC / 24V-AC
- Remotely accessible
- H.264, MJPEG and MPEG4 video compression
- Micro SD / SDHC card slot
- Includes Vivotek 32ch Central Management Software
- ONVIF support
Vivotek-FD8162 Quick Installation Guide
Included in the box
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.
