The VM-99509 is a 9 channel HD CCTV video multiplexer that supports AHD, HD-TVI, HDCVI, and analog security cameras. Each of the 9 BNC video inputs will accept any of the supported camera types. The VM-99509 combines the video signal from up to 9 CCTV cameras so that they can be displayed in different configurations on a single monitor. This multiplexer works with NTSC and PAL camera formats.
There are 9 BNC video inputs on the back of the multiplexer and 9 BNC loop outputs in case you need to feed the video from each camera to a second device. The VM-99509 has an HDMI and VGA outputs so that the unit can be connected directly to a standard HDMI / VGA monitor. There is also an analog BNC video monitor outputs (CVBS) that can be connected directly to a CCTV BNC monitor. Please note that for high definition 1080p or 720p video output, the HDMI or VGA output must be used. The analog BNC output supports 720x480 resolution (NTSC) and 720 x 576 resolution (PAL).
The VM-99509 supports dual monitor output, which means that the HDMI and VGA outputs can both be used at the same time. In addition, the analog BNC video output can also be used with both the HDMI and VGA outputs connected.
The VM-99509 can be controlled using the buttons on the front of the unit or via the wireless infrared remote control that is included. The unit's case is 1U in size and includes the rack mount hardware. Please note that for high definition 1080p or 720p video output, the HDMI or VGA output must be used. The analog BNC output supports 720x480 resolution (NTSC) and 720 x 576 resolution (PAL).
- 9 Channel Color Video Multiplexer
- 9 Channel BNC Video Inputs
- 9 Channel BNC Video Loop Outputs
- 1 HDMI Monitor Output
- 1 VGA Monitor Output
- 1 Analog BNC Monitor Output
- Dual Monitor Output Supported - VGA and HDMI video outputs can be used at the same time.
- Supports Analog CCTV Cameras
- Supports HD CCTV Cameras: AHD, HD-TVI, HDCVI
- Supports NTSC and PAL Video Formats
- HDMI / VGA Video Output - 1080p 50/60, 720p 50/60, 1440 x 900, 1280 x 1024, 1024 x 768
- Analog Video Output - 720 x 480 NTSC, 720 x 576 PAL
- Real-Time Live Video Display Refresh Rate
- Configurable Channel Sequence / Dwell Time Programming
- User-friendly front panel design and on-screen display set-up menu
- Adjust Individual Camera Brightness, Contrast, Saturation, Hue, and Sharpness
- High-Performance Image Freeze Function
- Selectable Digital Zoom Area
- Customizable Camera Title Text Overlay
- Wireless Infrared Remote Control
- DC Power Supply is Included
- 1U Rack-mount Case
- Rack Mount Included
- Dimensions: 420mm x 200mm x 45mm
- 2 Year Warranty from CCTV Camera Pros
Watch this video demo to see multiple HD security cameras connected to the VM-HD16 multiplexer at CCTV Camera Pros office. The VM-HD16 is the 16 channel version of this multiplexer. All of the functions are identical except that the VM-HD16 supports 16 cameras and a 16 channel view. The wireless remote is used to switch between all of the different display modes and configuration screens.
Video Display Modes
The following screenshots were captured with a mix of 1080p AHD and 1080p HD-TVI security cameras connected to a VM-99509 multiplexer. The HDMI video output of the VM-99509 was used to capture these images.
Single Screen / Full Screen / Single Camera
The single-camera view displays one camera, full screen. Users can select any of the 16 channels to be displayed by using the numbered channels on the wireless remote control.
Quad Screen / 4 Camera View / 4 Channel Screen
The quad view displays 4 cameras on a grid. Users can toggle between channels 1-4 and 5-8 by pressing the quad button on the wireless remote control multiple times to cycle through.
9 Camera View / 9 Channel Screen
The 9 channel view displays the video from cameras 1-9 camera on a grid. Users can toggle channels 1-9 by pressing on the 9 camera grid button on the wireless remote control.
2 Camera View / Vertical Dual Screen
The two camera view (vertical) view displays 2 cameras on one screen side-by-side. The two camera view is enabled by pressing the Mode button on the remote control. Users can select which two cameras are displayed by accessing the Mode Settings.
2 Camera View / Horizontal Dual Screen
The two camera view (horizontal) view displays 2 cameras on one screen, one on top of the other. The two camera view is enabled by pressing the Mode button on the remote control. Users can select which two cameras are displayed by accessing the Mode Settings.
3 Camera View
The three camera view displays cameras 1-3.
Alternate 4 Camera / Quad View
The alternative quad view displays 4 cameras with a large view of camera 1 on the left and cameras 2-4 smaller and on the right. The alternate quad camera view can be enabled by pressing the Mode button on the remote control.
6 Camera View
The six camera view displays camera 1 large in the upper left and cameras 2-5 smaller around camera 1. The six camera view can be enabled by pressing the Mode button on the remote control.
PIP Mode (Picture-In-Picture)
The PIP view displays one camera full screen and a smaller view of a second camera in the lower right. The picture in picture mode can be enabled by pressing the Mode button on the remote control.
PIP Mode / 2 Camera Mode Settings
The cameras that are displayed in PIP mode and 2 channel mode can be configured by accessing the Mode Setting screen.
Auto Sequence / Single Screen Camera Rotation
The auto-sequence mode displays a single camera full screen and rotates the view from one camera to the next. The pause / hold time for each camera can be configured on the auto-sequence settings screen.
This image shows the VM-99509 with the rack mount hardware attached. This is a 1U sized rack-mount case.
Wireless Remote Control
The infrared wireless remote control that is included with the VM-99509 allows the user to control all major operations of the multiplexer. Users can change to any of the supported display modes, digital zoom, freeze screen, access and navigate the configuration menu.
Please click here to download the VM-99509 product specification PDF.