The BPRO-OL952 is a bullet security camera that supports AHD, HD-TVI, HDCVI, and analog CCTV video surveillance modes. In AHD, HD-TVI, and HDCVI video modes, this surveillance camera captures 1080p / 2 megapixel high resolution video. In analog CCTV mode, it captures 960H (960 x 480 pixel) video. The video modes are easily switched by the installer using the
OSD joystick that is attached to the video cable.
This bullet CCTV camera has a 3.6mm lens which gives users a wide angle of view (approximately 90 degrees). The lipstick style housing is IP66 weatherproof rated which means that you can use this camera for indoor and outdoor installations.
Because of this camera's ultra-small size and shape, it is sometimes referred to as a lipstick camera. This camera has an OSD (on-screen display) that can be accessed using the included joystick. The OSD allows users to configure advanced settings of the camera in order to achieve the finest possible image for the environment and light level it is being used in. Click here to view a
video surveillance demo and here for sample surveillance pictures.
This camera is typically connected to a
CCTV DVR to record video surveillance. However, if you would like to connect this security camera to a TV instead of recording, please refer to this BNC to HDMI converter add-on. You can select it from the options drop-down above.
Bullet Camera Features
- 2 Megapixel Image Sensor and Lens
- 1080p HD Video Resolution (1920 x 1080) in AHD, HD-TVI, HDCVI Modes
- 960H Resolution (960 x 480) in CVBS / Analog CCTV Mode
- Video Connector: BNC
- Power Connector: 2.1mm Plug
- IP66 Weatherproof Housing for indoor or outdoor installation
- Works with analog CCTV DVRs and HD-over-Coax DVRs
- 3.6mm Lens - 90-degree field of view
- OSD Menu Control (joystick included)
- 3D - DNR (Digital Noise Reduction) Function
- D-WDR (Digital Wide Dynamic Range)
- Mounting Bracket Included
- 12V DC Power Supply Included
The following video demonstrates the 2 megapixel / 1080p video resolution of the BPRO-OL952 using it's AHD video mode. The picture quality is comparable in HD-TVI and HDCVI video modes. The resolution is lower when it runs in analog mode.
The following snapshot pictures were taken using the BIPRO-OL952 bullet camera at CCTV Camera Pros headquarters in West Palm Beach, Florida. This particular office is 13 x 20 feet in size. All of the camera's settings are set to factory default for this image.
To capture this image, the camera was connected to an
iDVR-PRO HD security camera DVR using RG59 Siamese coax cable. The camera's video mode is set to 1080p AHD video. Please click on the image to see a full 1080p resolution image.
iPhone App View
When the BPRO-OL952 is connected to an iDVR-PRO, users can remotely access a live view of the security camera using the iDVR-PRO Viewer App for iOS.
Android App View
Here is the remote live view from the iDVR-PRO Viewer app for Android.
Ultra Small Size Bullet
The OL952 bullet CCTV camera is very small in size. It bullet body of the camera measures just 2.25 inches long and the diameter is 3/4 of an inch.
Installers can easily select the video mode using the small joystick that is attached to the camera's video cable. Simply hold the joystick in any direction for 5 seconds to switch to that video mode.
Advanced On Screen Display Controls
A big advantage that this bullet camera has over other CCTV cameras is the advanced on-screen display that installers can use to set up the camera just right for the specific environment it is being set up in. Below is a picture that shows how the joystick / controller is connected inline with the camera cable. Installers use this to access the OSD menu.
Vari-focal Bullet Camera
CCTV Camera Pros also supplies this bullet CCTV camera with vari-focal lens. The HD-BL8 has a 3.5mm to 16mm varifocal lens that can be adjusted using the twist-rings on the camera body. This allows installers to adjust the field of view between an 82 to 16-degree field of view.
BNC to HDMI converter can be ordered with this camera. The converter allows you to connect your security camera to a TV via the HDMI input of your TV. In addition to the BNC video input on the converter, there is also a BNC loop output so that you can connect the camera to a security camera DVR in addition to a TV / monitor. The BNC loop output is optional to use.
This device can be used solely as a way to connect your security camera to a TV for a live view only or you can also use the BNC output to also connect the camera's video to a second device, such as a DVR for recording video surveillance footage. You can see this in the above installation diagram.
This camera works great with
Viewtron security camera DVRs. Viewtron 4K CCTV DVRs are hybrid. They support analog CCTV cameras, HD BNC cameras, and network IP cameras up to 4K resolution.
Custom Systems Designs & Quotes
CCTV Camera Pros designs custom video surveillance systems for customers and can provide a free quotes via email. In addition, you can schedule a free telephone consultation with a Pro.
We realize that requirements can vary and some customers need to mix and match various model cameras. Some customers have questions and prefer to speak with a professional designer on the phone. You can
request a free telephone consultation here. You can request a free custom quote here. You can also just email us directly instead of filling out a form here.
CCTV Camera Pros is proud to have an
A+ rating at the Better Business Bureau and an average of 5 star reviews at Reseller Ratings. We were able to achieve this through the outstanding technical support and customer service that our team provides to our customers.