More Resources

  Home >

Vivotek IP8162P Megapixel Indoor IP Camera, Full HD, H.264, WDR
2 Megapixel Indoor IP Camera


 

2 Megapixel Indoor IP Camera

Vivotek IP8162P Specification

Vivotek-IP8162/62P Specification
Our Price: $799.99



Availability:: Usually Ships in 24 Hours
Product Code: VIVOTEK-IP8162P
Discontinued

Description
 

Please Note: The Vivotek IP8162P is no longer manufactured, please refer to the Vivotek Box Camera page for a replacement.

The Vivotek-IP8162P 2 Megapixel Indoor IP Camera features recording of up to 30 frames per second in full 1080P video resolution. The Vivotek-IP8162P 2 Megapixel Indoor IP Camera comes with a 3.1 - 8mm Varifocal, P-iris lens and a 1/2.7" CMOS image sensor. The P-iris lens enables the user to dial in a much more precise focus thus allowing for a crisper image quality over traditional lens'.

This camera can be powered by 12V-DV, 24V-AC or POE-802.3af making it usable in almost any application. It includes a Vivotek 32 channel IP central management software and is also compatible with NUUO IP Camera Software.

The Micro SD / SDHC card slot enables the IP8162P to record snapshots and video clips locally. The Vivotek IP8162P supports two-way audio and includes a built-in microphone as well as an external microphone input. The removable IR cut filter allows the camera to drop down to 0.001 Lux in B / W mode, producing a high quality image in low light conditions.

Vivotek-IP8162P Features:

  • 3.1 - 8mm Varifocal P-iris Lens
  • Full 1080P resolution at 30FPS
  • 2 Megapixel 1/2.7" CMOS image sensor
  • WDR enhancement
  • Removable IR-Cut filter
  • Compatible with NUUO IP Software
  • 0.001 Lux rating in B /W mode
  • Built in microphone
  • POE 802.3af compliant
  • Supports two-way audio
  • Tampering detection
  • Dual voltage 12V-DC / 24V-AC
  • Remotely accessible
  • H.264, MJPEG and MPEG4 video compression
  • Micro SD / SDHC card slot
  • Includes Vivotek 32ch Central Management Software
  • ONVIF support

Vivotek IP8162P Quick Installation Guide
Vivotek-IP8162/62P Quick Installation Guide

P-iris Lens Comparison

Vivotek P-Iris Lens

Included in the box

Vivotek IP8162P Included

PoE for IP Camera

This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.

Single Port PoE Injector
4 Port PoE Switch
4 Camera PoE 		8 Port PoE Switch
8 Camera PoE 		16 Port PoE Switch
16 Camera PoE

Please refer to these diagrams, to learn more about how to wire IP cameras using a PoE injectors or a PoE switch.


Share your knowledge of this product with other customers... Be the first to write a review