The HD-BX50 is a 10x Zoom HD over coax security camera that supports AHD, HD-TVI, HDCVI, and analog CCTV video modes. This box camera captures
high definition video surveillance at 1920 x 1080 resolution (2-megapixel). The HD-BX50 has a built-in 6 ~ 50mm lens with a 10x optical zoom that can be controlled by a DVR. Check out this sample surveillance video and images to see a demo of this camera.
The HD-BX50 is hard wired to a DVR using
RG59 coaxial cable. As with all HD security cameras, they must be used with an HD compatible DVR.
The HD-BX50 supports
UTC (up the coax) for the zoom controls and access to the OSD menu. UTC is an alternative to the old method of using RS-485. RS-485 is NOT supported by this camera. The lens zoom can be controlled via UTC or using the joystick control on the back of the camera. UTC transmits the zoom and menu system controls over the same RG59 cable used for video (so there is no need to run an additional pair of cable). You must use an HD security camera DVR with UTC support to use this feature.
For use in low light environments, this camera has a Black and White
Lux rating of 0.001. The IR Cut Filter enhances the image quality by blocking any unusable infrared lighting and only allowing the visible light to pass through. This also allows the HD-BX50 to be used with external infrared illuminators for environments with little to no ambient lighting.
Important Note: Although this camera supports analog CCTV mode, CCTV Camera Pros does not recommend using the camera in this mode. The UTC function for zoom and OSD operations does not work in analog mode. Also, the video quality is not very good in analog mode. We do highly recommend using this camera in the 1080p AHD, 1080p HD-TVI, and 1080p HDCVI video modes that it supports.
HD Zoom Camera Features
- 1/2.8" Sony CMOS Image Sensor
- 1920 x 1080 Resolution / 1080p / 2 megapixel
- Compatible with 1080p AHD / HD-TVI / HDCVI DVRs
- UTC / UP The Coax Zoom and Menu Support
- 4-in-1 Camera - Selectable HD-TVI, AHD, HDCVI, and Analog CCTV Video Modes
- Auto White Balance
- 3D Digital Noise Reduction for Superior Image Quality
- IR Cut Filter for Use with External IR LEDs
- Back Light Compensation (BLC)
- D-WDR (Digital Wide Dyanmic Range) Enhancement
- 10x optical zoom (6 ~ 50 mm)
- Zoom Control via Windows & Mac Software, iPhone, and Android Mobile Apps when connected to a UTC Compatible DVR
- Dual Voltage 12V-DC / 24V-AC (As of December 2018)
- 12V-DC Power Supply Included
Be sure to click on the gear icon in the lower right of the video and select 1080p resolution if you are viewing from a desktop computer.
Watch this video to see the HD-BX50 being controlled using an iDVR-PRO DVR. Users can zoom in and out using the USB mouse connected to the DVR. Users can also control the zoom of the camera from the Android and iPhone apps. The iDVR-PRO Mac software and Windows software also supports remote zoom controls.
These images were captured using an HD-BX50 connected to an iDVR-PRO surveillance DVR. The images are 1080p HD resolution. Click on the images for the full-sized view.
This first image was captured with the motorized lens zoomed out to the widest position. The small words on the side of that truck are 62 feet away from where the camera is mounted.
The above image shows the PTZ controls on the DVR that are used to control the zoom in/out functions of the camera. The up arrow on the PTZ controls zooms the camera lens in and the down arrow zooms the lens out.
This last image shows the angle of view when the lens is zoomed all the way into the 50mm / 10x zoom level. You can see that the camera easily focuses on the words displayed on the truck 62 feet away.
This image shows the back of the HD-BX50. The joystick on the camera serves two purposes. 1) It is used to access the camera's OSD (on-screen display) to adjust color, light, and many other settings. 2) The joystick can also be used to adjust the zoom / angle of view of the lens in and out. Many customers do not use this camera to actively zoom the lens in/out. Instead, they use the zoom lens as a convenience during setup to get the exact angle they need. The advantage of this mechanical zoom lens is that it auto-focuses. When using a
security camera test monitor, one installer can easily adjust the view focus this camera during installation
Other customers do find the ability to zoom in/out using controls on their DVR convenient.
4-in-1 Selectable Video Mode
By default, the HD-BX50 is configured in 1080p AHD mode. If you are using an iDVR-PRO DVR or another AHD compatible DVR, you do not need to adjust the mode. If you do need to change the video mode, it can be switched to HD-TVI, HDCVI, or analog CCTV (CVBS) modes via the OSD (on-screen display). The OSD can be accessed using the joystick on the back of the camera or via UTC DVR controls (if using a
UTC compatible DVR such as iDVR-PRO). UTC (up the coax) controls allow a user to access the camera's OSD menu using the PTZ controls on the DVR.
To change video modes, access the OSD menu of the camera and select adjust.
The above image shows the OSD of the camera being accessed via the PTZ controls on an iDVR-PRO. If you are using an iDVR-PRO or another DVR that supports UTC controls, you can access the OSD of the camera by clicking on the "open iris" PTZ command (red arrow above notes this). Or you can send a preset-95 command (notes with the yellow arrow). Either one opens the OSD menu and also acts as the select command. Use the up / down arrows (noted in the green box) on the DVR's PTZ screen to move the selection of the OSD to "Adjust", then select that the adjust submenu by clicking on the "open iris" command or sending a preset-95 command.
You can also use the joystick on the back of the camera to navigate the OSD to select adjust.
On the "Adjust" screen, use the Up/Down arrows to select "Monitor Out". Then use the Right/Left arrows to change the video mode. Last use the "open iris", preset-95, or center button (if you are using the joystick directly on the camera) to apply that video mode. Select Ret (return). Then Save and Exit.
Outdoor Camera Housing
For outdoor installations, the HD-BX50 can be mounted in an outdoor box camera housing. Because this camera has a built-in zoom lens, the size of the camera is much smaller than traditional box-style cameras. This allows the camera to easily fit into our
compact outdoor housing for box security cameras.
For extremely hot or cold weather conditions, installers can also use this
outdoor camera housing with heater and fan.
HD-BX50 product specification here.
Compatible with iDVR-PRO HD DVRs
The PTZ-HD-10A works great with iDVR-PRO hybrid surveillance DVRs. iDVR-PROs support analog CCTV, HD-TVI and AHD CCTV cameras. The remote camera viewing via mobile apps, Mac, and
Windows software are excellent.
iPhone / iPad Compatible
Click here to learn more about the latest
iDVR-PRO HD CCTV DVRs.
iDVR-PRO Works with Analog CCTV and HD Security Cameras
Users can mix and match different camera technologies. This is perfect for customers that have existing CCTV cameras and want to upgrade to high definition over time. All DVR channels support all camera types. iDVR-PRO DVRs work with the following security camera types and resolutions.
Request a Demo
Want to see how live video on this camera looks remotely over the Internet, please request a demo login below. You will be able to log in from iPhone, iPad, and Android mobile devices. You can also log in from Macintosh and Windows computers. Please
click here to request a demo login.