Please Note: The Geovision GV-CA120 is no longer manufactured. Please refer to the Geovision IP camera page for a replacement.
The Geovision GV-CA120 is a
1.3 megapixel IP cube camera that features 1280 x 1024 resolution recording at a full 30 frames per second; a 3.35mm fixed lens and 1/2.5" CMOS image sensor which provide the user with high image quality with a wide (86 degree) viewing angle (Demo Video).
WDR Enhancement feature takes the brightest part of the image and the darkest part of the image and combines them to produce one balanced image. The GV-CA120 has white light illuminators (flashlight like) with an effective range of 5 meters / 16 feet to maintain visibility is very low light environments.
The Geovision GV-CA120 has a built in
PIR motion detector that can be configured to set off an alarm when motion is detected. Because the Geovision GV-120 camera includes the PIR motion detector hardware, it will deliver a higher caliber of motion detection than the more commonly used software models.
This camera supports two way audio with the built in speaker and microphone. The Geovision GV-CA120 Camera also makes it possible to record video clips and snapshots locally on the camera using the Micro SD / SDHC / SDXC card slot (card not included).
Dual video streams of H.264 or MJPEG are supported. Like all Geovision IP cameras, the GV-CA120 includes a free 32 channel IP license that is compatible with any Geovision IP camera. It can be remotely accessed by a number of devices such as iPhone, iPad, Android, PC and 3GPP mobile devices.
The Geovision GV-CA120 can be powered by either the included 5V-DC power supply or by Power over Ethernet (POE 802.3af).
Geovision GV-CA120 Features
- Indoor Only Camera
- 1 Megapixel resolution with a 3.35mm Lens
1/2.5" Progressive Scan CMOS Image Sensor
Built-in Speaker / Microphone
White Light Illuminators with a range of 5 Meters / 16 Feet
Up to 30 FPS at 1280 x 1024 resolution
WDR Enhancement (wide dynamic range)
Color Lux Rating - 1.0
B/W Lux Rating 0.5
IR LED Lux Rating - 0.1
Power over Ethernet (POE 802.3af) Compliant
Micro SD / SDHC / SDXC Card Slot
iPhone, iPad, Android, PC and 3GPP Mobile Device Accessible
Dual Video Streams of H.264 and MJPEG Supported
PIR Motion Detection
31 Language web Interface
32 Channel License Included
Mounting Positions / Dimensions
Click on the images above to enlarge.
32 Channel Geovision Software
Each Geovision camera includes a free 32 channel software license which can be used with any Geovision IP camera. Install the Geovision software on a Windows computer and create a PC based surveillance DVR / NVR for your Geovision cameras. Click here to view the latest
Geovision software specification.
Remote Viewing Support
Geovision includes many options to view your cameras remotely over a local network and also remotely over the Internet. Remote viewing is supported by both Windows and Mac based PCs.
Geovision also includes support to view cameras from cell phones and other mobile devices including: iPhone, iPad, iPod Touch, Android, Blackberry, Windows Mobile, Symbian, and other 3G / 3GPP cell phones. Geovision provides free apps for all of these types of devices.
Some remote viewing methods require use of the NVR software that is included with the camera and some methods can connect directly to the camera and do not require a PC be used. Click here for more information on
Geovision remote viewer options.
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.