Use these instructions to sync Zavio cameras with your wireless network. Once we have completed this setup you will be able to remove the Ethernet cable and transmit the video signal over a wireless stream.

1. For the initial setup you will need to have the camera hard wired via Ethernet cable direct into your wireless router.
2. Log into your Zavio camera. User name and password is admin by default
3. Click the settings >basic > network > wireless.
4. Now you will need to turn the wireless on.
5. Select the Router to connect to.
6. Type in the network key/password for your wireless router.
7. Press OK to Save settings

    
     
    8.Once settings are saved you will need to restart the camera by simply going into System menu > Initialize > Press Reboot button.