Home >

IP-Z210A IP Camera w/ 2-Way Audio, Works with NVR Software, PoE option
IP Camera

Alternative Views:

IP Network Camera

Power Over Ethernet (PoE) option
Our Price: $229.99

Product Code: IP-Z210A

Add PoE?:


Please Note: The IP-Z210A is no longer manufactured, please refer to the Zavio F210A as a replacement.

The IP-Z210A is an ultra compact IP network camera featuring a high sensitivity progressive scan CMOS sensor. This IP camera achieves image quality and low-light performance previously only seen in CCD cameras. Although this is one of the world�s smallest IP security cameras, it still possesses all the powerful features that you expect from a professional network cameras.

IP Camera Features

  • Ultra-compact size
  • 1/4" Progressive CMOS Sensor
  • 30 Frames per second MJPEG & MPEG-4 in al resolutions
  • Maximum Resolution 640x480 (VGA) provides superior image quality
  • Simultaneous MPEG-4 and Motion JPEG video stream
  • Excellent Image Quality up to flexible 30 fps in all resolution for optimum bandwidth use
  • Superior Low-Light Performance with Automatic Night-mode
  • Two-way Audio with Built-In Microphone
  • Optimal Synchronization of Audio and Video
  • Support Live Video Viewing on Microsoft Live Messenger (MSN Messenger)
  • Mobile Phone Streaming Live Video through 3GPP/ ISMA/ RTSP
  • Mobile Phone Live Image through 2.5 WAP
  • Multi-level Password Protection for Restricting Camera Access
  • Built-In Multi-Window Motion Detection (3 detection areas)
  • Video Buffer makes the Streaming Smoother
  • UPnP for Fast and Easy Installation
  • DDNS Supported
  • Works with NVR Software
  • User-friendly & Multi-lingual user interface
  • Optional D-Link DWL-P200 PoE (power over ethernet) adapter

DLINK DWL-P200 PoE Adapter

The optional D-Link DWL-P200 power over Ethernet adapter that is available with this camera delivers both data and electrical power to Ethernet-enabled IP cameras using a single Ethernet cable. Using Power over Ethernet, you eliminate the need to place your network cameras near a power outlet, giving you more freedom in placement.

The DWL-P200 Power over Ethernet (PoE) Adapter is simple to install, requiring no tools and no software. Its compact size makes implementation of the DWL-P200 easy. Plug the base unit into a power outlet, and then connect the terminal unit to your network device using any standard Ethernet cable. Once set up, the terminal device unit can output power to your IP camera.

The DWL-P200 simplifies your IP surveillance system installation by allowing you to place it beyond the range of standard power outlets. You can now mount these devices to a ceiling without placing them near a power supply.

With the DWL-P200 Power over Ethernet (PoE) Adapter, both power and data can be transmitted up to 328 feet (100m)* using standard Ethernet cabling with virtually no reduction in data throughput. Use the DWL-P200 with Ethernet-enabled devices where power outlets are not readily available.

Share your knowledge of this product with other customers... Be the first to write a review