More Resources

  Home >

Geovision GV-Relay V2, Digital IO Alarm in / Alarm Out Relay, 4 ports
Geovision GV-Relay V2
 
Price: $58.99


Free Shipping
Product Code: GV-RELAY-V2


Warranty:

Discontinued  
Description
 

Please Note: The GV-Relay V2 has been discontinued and is no longer manufactured by Geovision.

The Geovision GV-Relay V2 is used to integrate Geovision surveillance systems with burglar alarm and home automation devices. It enables Geovision IP cameras, DVRs, IO USB boxes, and GV-Net cards to integrate with devices that require more power than than what the triggering device is capable of. For example, a Geovision IP camera may only output 3-5 volts from its digital output port, but the installer wants to trigger a light that required a 12 volt circuit to be grounded out. The GV-Relay allows the lower powered device to trigger the higher powered one.

Geovision GV-Relay Features

  • 4 relay output ports
  • Each port can be configured to be normally open or normally closed
  • Relay Capacitance: 10A 250V AC, 10A 125V AC, 5A 100V DV
  • Relay On Time: 8ms
  • Relay Off Time: 5ms
  • Dimensions: 120 x 26 93 mm / 4.72 x 1.02 x 3.66 inched

Product Downloads

Share your knowledge of this product with other customers... Be the first to write a review


Geovision GV-600-12 DVR Card $349.00
PTZ Camera Controller Joystick, RS-485, Pelco-D, Pelco-P $199.99
Geovision GV-PT130D Pan Tilt Network Camera, 1.3 Megapixel, Infrared $529.99
Geovision GV-EBL3101 Low Lux IP Bullet Camera, 3 MP, 2.8~12mm, IP67 $359.99
Vivotek FD8362E Vandal IP Dome Camera, WDR, Ultra Weatherproof, H.264 $829.99
NUUO SCB-7016, 16 Channel DVR Card, 480 FPS, D1 Resolution $999.99
IR-30M98 Infrared Illuminator, 95 LEDs, 30 Meter $179.99
HDMI to USB Converter, Video Capture Streaming Device, USB-3 USB-C $189.99