CCTV Video Amplifier

Home >

CCTV Video Amplifier, 4 Input to 4 Output, RG59 Coaxial

Download Product Specification

Price: $89.99

Product Code: AMP-4004

Discontinued

Description

Please Note: The AMP-4004 is no longer manufactured. Please refer to the Analog Video Splitter and Amps page for a replacement.

The AMP-4004 four channel amplifier can increase the CCTV video transmission range of your surveillance system up to 1000 meters over RG59 coaxial cable. This amplifier has four (4) channel video amplifier provides 4 BNC video inputs and 4 BNC video outputs. The AMP-4004 is typically positioned near your CCTV DVR where BNC video jumper cables can be used to connect the output of the amplifier to the camera inputs of DVR unit. Each of the 4 video inputs can be connected to a CCTV camera located up to approximately 3000 feet (1000 meters) away from the DVR. The AMP-4004 has individual sharpness and brightness adjustments so each camera can work perfectly with your DVR.

This product is made for use with analog CCTV cameras and does NOT work with HD-SDI, AHD, HD-TVI, or HDCVI cameras. You can find HD-SDI video splitters and AHD/TVI/CVI video splitters here.

Share your knowledge of this product with other customers... Be the first to write a review

	BNC Female Connector RG59, BNC Crimp Connector for RG-59 Coax Cable $1.50
	NUUO SCB-6008, 8 Channel DVR Card, 240 FPS $699.99
	13 Foot BNC Patch Cable, Yellow RG-179 Coax Jumper, BNC Male, 75 Ohm $9.99
	Geovision GV-EFD2700-2F Mini Fixed Dome Network Camera, 3.8mm Lens, IR $199.99
	Geovision GV-CA120 1.3 Megapixel Cube Network Camera, WDR Enhancement $269.99
	Geovision GV-UBX1301-0F Indoor Ultra Box Camera, 3mm Fixed Lens, IR $299.99
	Geovision GV-POE0800 8 Port 802.3at Compliant PoE Switch, 10/100Mbps $199.99
	Vivotek IP8365H Corridor View IP Bullet Camera, 2 Megapixel, Infrared $799.99