Geovision GV-Relay V2 | Digital IO Relay

Home >

Geovision GV-Relay V2, Digital IO Alarm in / Alarm Out Relay, 4 ports

Alternative Views:

Price: $58.99

Product Code: GV-RELAY-V2

Warranty:

Discontinued

Description

Please Note: The GV-Relay V2 has been discontinued and is no longer manufactured by Geovision.

The Geovision GV-Relay V2 is used to integrate Geovision surveillance systems with burglar alarm and home automation devices. It enables Geovision IP cameras, DVRs, IO USB boxes, and GV-Net cards to integrate with devices that require more power than than what the triggering device is capable of. For example, a Geovision IP camera may only output 3-5 volts from its digital output port, but the installer wants to trigger a light that required a 12 volt circuit to be grounded out. The GV-Relay allows the lower powered device to trigger the higher powered one.

Geovision GV-Relay Features

4 relay output ports
Each port can be configured to be normally open or normally closed
Relay Capacitance: 10A 250V AC, 10A 125V AC, 5A 100V DV
Relay On Time: 8ms
Relay Off Time: 5ms
Dimensions: 120 x 26 93 mm / 4.72 x 1.02 x 3.66 inched

Product Downloads

Product Installation Guide

Share your knowledge of this product with other customers... Be the first to write a review

	Vivotek FD8162 Fixed Dome IP Camera, PIR Sensor, Micro SD, POE 1080P $599.99
	22" BNC Monitor, Security Camera Monitor, CCTV Monitor, BNC In Out LCD $499.99
	Geovision GV-SNVR1600 Stand Alone Network Video Recorder, 16 Channels $849.99
	HDPRO-4TB Surveillance DVR Hard Drive 4 TB (Terra-byte) SATA $349.00
	RCA-2M1S RCA Male Ends to 3.5mm Stereo Female, Y Cable Converter $7.99
	10x Zoom HD Over Coax Box Security Camera, AHD HD-TVI HDCVI CCTV, UTC $259.99
	BIPRO-CX550VF Outdoor IR Surveillance Camera $399.99
	VDS-1016 BNC Splitter, CCTV Video Distributor, 1 BNC In / 16 Out, 1U $189.99
	3 Foot RCA Cable $4.99