Please Note: The Geovision GV-IP Decoder Plus is no longer manufactured. Please refer to the Geovision video server page for a replacement.

The Geovision GV-IP Decoder Box Plus allows users to decode IP streams from IP cameras and display them directly on an HDMI monitor rather than over the network. IP camera to VGA monitor display is also supported. The Geovision GV-IP Decoder Box Plus is compatible with Geovision IP cameras and 3rd party IP cameras that are ONVIF compatible or adhere to RTSP streaming. The GV-IP Decoder can automatically search the LAN for ONVIF supported third-party IP devices which makes installation / configuration easy.

The decoder is able to decode up to 4 megapixel IP cameras, decode video streams in H.264 at the maximum frame rate of the IP device and display a video output resolution of 1080P. The Geovision GV-IP Decoder is capable of decoding up to 64 IP streams and features support for GV-Joystick control for Geovision PTZ cameras and Geovision IP Speed Domes. SD / SDHC card and (4) USB ports allow for snapshot storage and firmware upgrades. The HDMI and VGA monitor outputs support Single View, Quad View, and 9-Division View. Please note that only one output can be used at a time. If you want multiple monitor displays, you must use multiple decoders.

GV-IP Decoder Plus Features

• Compact Design, Easy Installation
• Decodes up to 64 IP Streams
• VGA and HDMI Monitor Outputs
• Control Geovision PTZ Cameras with GV-Joystick
• 720p, 1080i and 1080p Resolutions Supported
• SD / SDHC Card and (4) USB Slots for Snapshot Storage and Firmware Upgrades
• Take Still Image Snapshots
• H.264 Video Compression
• Supports TCP, RSTP, ONVIF and PSIA Protocols
• 10/100/1000 Ethernet Port for Network Viewing

IP Decoder Network Diagram

User Manual

Download the GV-IP Decoder Box Manual here.