Home >

MON-LCD25P Portable CCTV Test Monitor, Hand-Held, Camera Power Supply
Portable CCTV Test Monitor

Alternative Views:

Our Price: $129.99

Product Code: MON-LCD25P


Please Note: The MON-LCD25P is no longer manufactured, please refer to the CCTV Test Monitor page for a replacement.

The MON-LCD25P portable CCTV test monitor has a camera power output which allows surveillance system installers to mount, focus and test security cameras before running any video or power cables. This hand-held test monitor includes a video cable with both RCA and BNC connectors which make it compatible with just about any CCTV camera on the market. This portable service monitor has a 2.5" TFT LCD screen and supports input from PAL & NTSC video cameras. The MON-LCD25P includes a rechargable battery and chargin power supply. A power cable is also included which connects the monitor power output to the camera power input. The power output is 350mA DC.

Portable CCTV Test Monitor Features

  • 2.5 inch LCD Monitor
  • BNC Video Input
  • RCA to BNC converter enables you to connect to RCA and BNC devices
  • 350mA DC Power output supplies power to CCTV camera being tested
  • Video System Input: PAL / NTSC
  • Used in CCTV Testing and Monitoring
  • Neck Strap with push release
  • Rechargeable Li-Ion Batteries & Power Supply for Charging

Portable CCTV Test Monitor Video

The below product review video shows what comes in the box with the 2.5" held-held CCTV monitor and also demostrates its use when connected to a DPRO-B24DHR infrared CCD camera.

DC Power Output for Cameras

The DC power output allows installers to mount and focus cameras without a dedicated power source in place. This is very handy for construction sites where electricians are running power. Low voltage installers can begin mounting and focusing cameras without relying on electricians to finish wiring power.

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 2 Write a review.

  2 of 2 people found the following review helpful:
3 of 5 Works Great, but somewhat delicate September 8, 2014
Reviewer: Installer from GA United States  
I used this for the first time to install 32 cameras in a warehouse.  This monitor made it possible to preset the cameras to a 3X shot, fully focused right out of the box.  We placed the camera and were able to get 90% perfect without someone at the other end.
If you work by yourself, this saves a lot of time.
The housing is plastic which may not hold up under constant use, the BNC connector came loose and was of concern.  The test lead consists of a tiny gauge power lead with connectors and mini-coax with BNCs.  The LCD screen is just big enough to get a rough idea of what your shot is, but does not provide enough detail in some cases.  I will go for a 4.3 or 5 in. screen the next time.

Since it costs $150 (advertised price plus "handling") plus shipping, it would have to save at least three hours (labor rate) to break even.  So far it has save me about an hour.  However, if you are a one man team, it pays for itself in one day.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Built in DC power output is handy September 8, 2014
Reviewer: Mike Z from Miami, FL United States  
I find the DC power output of this monitor handy to test cameras before going through the trouble of connecting the permanent power supply. The 2.5" monitor is small but quite clear.

Was this review helpful to you?