This Surveillance Camera PoE Injector / Splitter provides both data and power to Ethernet enabled devices using a single Ethernet cable, and eliminates the need to place network devices near power outlets.

PoE Injector / Splitter Features:

• Transmit Power up to 328 Feet (100m)^*
• Adjustable Output Power
• Plug & Play Installation

---

The POE-DL-IS200 Power over Ethernet (PoE) Injector / Splitter delivers both data and electrical power to Ethernet-enabled devices via a single Ethernet cable. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a PoE surveillance camera or a wireless access point, near a power outlet, giving you more flexibility in placement.

This Power over Ethernet (PoE) Adapter is easy to install. Its compact size makes implementation easy. Plug the base unit into a power outlet, and then connect the terminal unit to your network device using any standard Ethernet cable.  The terminal device unit can output power** to any compatible 5V or 12V Ethernet-enabled device.

The POE-DL-IS200 Power over Ethernet (PoE) Injector / Splitter simplifies your installation of Ethernet network devices, such a security camera or wireless antenna, by allowing you to place it beyond the range of standard power outlets. You are now able to mount these devices to a ceiling or outdoors without placing them near a power supply.

With this Power over Ethernet (PoE) Adapter, both power and data can be transmitted up to 328 feet (100m)* using standard Ethernet cabling with virtually no reduction in data throughput. Use the POE-DL-IS200 with Ethernet-enabled devices where power outlets are not readily available.

* 1 Maximun distance per 802.3u specifications
** Maximum power output: 5 volts = 2.5 amps; 12 volts = 1 amp

• PoE Injector / Splitter Specifications

  Specifications
  Category 5 (CATS) Ethernet Pin Usage	• Data: 1,2,3,6 • Power: 4,5,7,8
  LEDs	• Power (Base Unit) • Power (Terminal Unit)
  Voltage (Power Supply)	• Input: 100-240V AC, 50/60Hz • Output: 48V DC, 400mA
  Voltage (Base & Terminal Unit)	• Base Unit Input: 48V DC, 400mA • Terminal Unit Output: 5V DC, 2.5A or 12V DC, 1A
  Temperature	• Operating: 32-104°F (0-40°C) • Storing: -40-158°F (-40-70°C)
  Humidity	• Operating: 10%-80% RH • Storing: 5%~90% RH
  Certifications	• FCC Class B • CE • C-Tick
  Dimensions	• L = 52.0mm • W = 80.9mm • H = 28.0mm
  Weight	• .256lbs