Home > CCTV Test Monitors >

CCTV Test Monitor, Service Analog, AHD, HD-TVI Cameras, 5" LCD
CCTV Test Monitor


 
Alternative Views:


CCTV Test Monitor

Purchase from a merchant you can trust!

CCTV Camera Pros Rating

Click to see our customer reviews.

Our Price: $179.99



Product Code: MON-LCD35TM


Warranty:


Discontinued  
Description
 

The MON-LCD35TM CCTV test monitor uses a BNC video input allowing CCTV installers to connect and test security cameras when performing surveillance system installations. This portable CCTV service monitor features a 5" TFT LCD screen and supports video input from PAL & NTSC Analog cameras in addition to High Definition AHD, CVI, and TVI cameras using the BNC input. The monitor screen supports 800 x 480 pixel resolution.

This CCTV test monitor is powered by a built-in rechargeable 3.7V 2600mA Lithium Battery, capable of powering the monitor for up to 5 hours with normal use. The MON-LCD35TM can also power cameras using the 12V-DC power output, which is rated up to 800mA. This is handy for testing camera angles and installation locations before temperament power cable is in place. Users can also charge cell phones and other devices using the 5V-DC USB port.

There is no need for a flashlight when using the 35TM, as it has a built-in LED for illumination. This monitor can also be used as a small monitor for vehicle navigation systems or other video application where a very small monitor is required.

CCTV Test Monitor Features

  • 5 inch TFT LCD Monitor
  • Works with Analog CCTV, AHD, CVI, and TVI Cameras up to 4K
  • Manual Operation
  • On Screen Display Menu
  • 1 BNC Video Input
  • Audio Input
  • Built-in Speaker
  • RS485 Support (Pelco D and P Support)
  • UTP Cable Tester
  • 12V-DC Output to Power Cameras
  • 5V-DC USB Port for Charging Cell Phones or other USB compliant devices
  • RCA to BNC converter enables you to connect to RCA and BNC devices
  • Video System Input: PAL / NTSC
  • Used in CCTV Testing and Monitoring
  • Adjustable Wristband
  • Built-in Rechargeable 3.7V 2600mA Lithium Battery

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Great service October 12, 2020
Reviewer: DanielN from Lenexa, KS  
Great customer service when help was needed.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
5 of 5 Great Product December 20, 2010
Reviewer: Eddie Reed from Nashville, TN United States  
I will tell you a few things that aren't made perfectly clear in the video.

One is that my unit never fully charges the rechargeable batteries. The red light never goes away when charging. That's okay as long as you charge the unit for about 20 minutes before you use it. I have found it more convenient to use regular Duracell AA batteries, the power input can vary from 4 to 9 vdc, so it won't hurt the unit to use 6v (4 x 1.5) instead of 4.8v (4 x 1.2).

Also, to clarify the main cable for the  A/V camera input. The input is a 3.5mm standard jack (4 poles) that plugs into the camera. The other end of the cable has 3 cables all molded into the jack. One is a Male BNC , one is a female BNC, and the other is a female RCA.

You will want to use a short ( 1 to 3 ft) extension cable because the cable is too short to have the unit strapped to your arm while plugged into a camera.

I hope this information is helpful. I love this monitor and highly recommend it.


Was this review helpful to you?


Browse for more products in the same category as this item:

CCTV Test Monitors
Installation Tools
CCTV Test Monitors > AHD Test Monitors
CCTV Test Monitors > HD-TVI Test Monitors
CCTV Test Monitors > HDCVI Test Monitors