You are here: Home > NUUO Surveillance Systems > Camera Occlusion Detection & Alert

NUUO Surveillance System Camera Occlusion Detection Setup

The following video demonstrates how to setup the NUUO surveillance systems to detect camera occlusion and signal an alert.  Camera occlusion can occur from an object obstructing the cameras view such as if someone puts their hand over the camera lens to obstruct the view.




Video Transcript

Welcome to CCTV Camera Pros video instruction series.  In this video we will demonstrate how to setup a NUUO surveillance system for camera occlusion detection and alert.  Camera occlusion occurs when a camera's view is obstructed by something.

  1. To setup camera occlusion detection, click on the Guard button on the NUUO main console.
  2. Select the camera that you want to setup and click the insert event button.
  3. On the event screen, select camera occlusion and click OK.
  4. You can adjust the sensitivity and interval on this screen.  When done, press OK.
  5. By default any camera occlusion events will trigger an alert message to be displayed on the screen.  Other types of actions can also be configured. 
  6. To activate the smart guard system including the camera occlusion settings just configured, click on the start button and select start smart guard system.
Notice now when the cameras view is blocked by smoke, the camera occlusion event is triggered and al alert is sent to the screen.  The camera occlusion event as well as all types of events can also be configured to take additional actions such as email alerts, phone alerts, text message alerts, and central monitoring station alert.

We hope that this video was helpful in demonstrating how to setup camera occlusion events in NUUO PC based DVR systems.  Please visit www.cctvcamerapros.com for more information.

Thank You for watching.