The WIFI-AP3500 is an indoor wireless access point that can be used with wireless IP cameras or other wireless bridge antennas to create a wireless network for security cameras.  Use this wireless access point to connect one or more wireless IP camera. This wireless access point uses 802.11B/G and has a 2000mW signal strength.  This device can be configured as an access point, client bridge, repeater, or router.  This WIFI-AP3500 is approximately 20 times more powerful than most consumer access points such as Linksys, D-link, and Netgear.  The WIFI-AP3500 is an enterprise level product that supports 7 multi-functions to operate for every kind of working environment. It supports high transmit output power and high data rate which plays different roles of Access Point/Client Bridge/Repeater/WDS AP/WDS Bridge/Client Router/AP Router.

The WIFI-AP3500 operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards. It supports different output power level settings, bandwidth selection, and RSSI indicator which enables the best transmitting and receiving signal for traffic communication. For more sensitive security requirements, the WIFI-AP3500 can encrypt all wireless transmissions using WPA2, WPA, or WEP data encryption standards.  The MAC address filter lets you select the devices that should have access to your network.

Wireless Access Point Features

• Connect multiple wireless IP cameras to one wireless bridge
• 802.11B/G Access Point / Client Bridge / Repeater / Router
• High 2000mW EIRP Wireless Power
• Dual High Gain Detachable Antenna

Wireless Access Point Specification

Click here to download the wireless access point specification PDF.