The VT98334T is an active video balun transceiver, also known as an active UTP balun transmitter. Video baluns are used to transmit video signal from CCTV cameras using UTP cable such as CAT-5 cable. This active balun allows UTP wire (CAT5 is one type) to be run up to 3000 feet when used with an active video balun receiver. This active balun can also be used with a passive video balun making it capable of transmitting a video signal up to 1200 feet. The VT98334T product is NOT a UTP balun pair. You must use this product in conjunction with a receiving balun. This device is DC powered and included a power supply when you purchase from CCTV Camera Pros.

Active Balun Installation Diagram

The below diagram illustrates how the active balun transmitter is used in conjunction with another active balun receiver using CAT-5 cable instead of coaxial cable for a CCTV camera installation.

Active Video Balun Features

• Balun Type: UTP Active Transceiver Module
  
• Video Transceiver: 1 Port
• Transmission Distance: up to 3000 feet when used with active reciever
• Transmission Distance: up to 1200 feet when used with passive video balun
  
• Power In: 12V DC
  
• Video In/Out: BNC male
• Video Format: RS 170, NTSC, PAL, CCIR or SECAM
• Operation Frequency Range: DC to 10 MHz
• Twisted Pair Connector: 2 pin conector
• Common Mode Rejection: 70 dB
  
• Wire Type: UTP Cat 2, 3, 4, 5e, 6; 12~24 AWG or Heavier
• Cost savings by replacing costly coaxial cable
• Neater wiring eliminates bulky cables